Skip to content

OMAP: Introduce Backlight driver for Sharp LS037V7DW01 LCD panel

Tomi Valkeinen linux-arm-kernel linux-omap 1 version New

Get series with b4
b4 am 1292334810.6893.126.camel@tubuntu

Versions newest first

  1. v1 Latest0 of 3 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] OMAP: Introduce Backlight driver for Sharp LS037V7DW01 LCD panel
Quoted 5 lines · ext Bryan Wu
Quoted 5 lines

This kind of backlight is, in a sense, totally separate component from the panel itself. All they have in common is that they are packaged in the same physical display module, and they usually share the same connector.

Quoted 8 lines
Quoted 2 lines

I have seen three kinds of backlights on OMAP devices:
- on/off GPIO (like on 3430 SDP)

It seems like that we need a gpio_bl.c driver for this kind of usage.

Quoted 1 line

- PWM based (zoom seems to have this)

I failed to find any PWM or Backlight code in ZOOM boards source file. Is that possible to us pwm_bl.c driver which is used by pxa?

It's not yet in the official kernel. You can find it in arch/arm/mach-omap2/board-zoom-display.c in my tree, under devel-branch.

I haven't looked at pwm_bl.c, but I wouldn't be surprised if there already was a driver we can use for this.

Quoted 5 lines
Quoted 3 lines

- Panel controlled (Taal-panel. Also PWM based, but OMAP doesn't see that)

Yeah, I don't plan to reform this driver at this time.

Quoted 8 lines
Quoted 5 lines

The first two could (should?) be totally separate backlights from the panel itself. For those, a generic backlight driver could perhaps work. The third one needs to be quite tied to the panel driver, and I'm not sure how easy it would be to have a separate driver for that.

OK, I totally understand you concern now. How about a GPIO based backlight driver for the first 2 cases.

GPIO based backlight driver would work properly only for the first case.

Tomi