Skip to content

powerpc: FSCR fixes for POWER8

Michael Neuling linuxppc-dev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3powerpc: Fix setting FSCR for HV=0 and secondary CPUsarch/powerpc/kernel/cpu_setup_power.S+2 -12 replies
1/3powerpc: Fix setting FSCR for HV=0 and on secondary CPUsarch/powerpc/kernel/cpu_setup_power.S+2 -10 replies
2/3powerpc: Add DSCR FSCR register bit definitionarch/powerpc/include/asm/reg.h+2 -11 reply
2/3powerpc: Add DSCR FSCR register bit definitionarch/powerpc/include/asm/reg.h+2 -10 replies
3/3powerpc: Set DSCR bit in FSCR setuparch/powerpc/kernel/cpu_setup_power.S+1 -10 replies
3/3powerpc: Set DSCR bit in FSCR setuparch/powerpc/kernel/cpu_setup_power.S+1 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] powerpc: FSCR fixes for POWER8

Benh,

Here are a few fixes for the POWER8 FSCR.

First patch changes the FSCR so that it's set on secondary CPUs as well as when MSR HV=0.

Second two patches make sure that the FSCR DSCR bit is set so that we don't trap on DSCR accesses.

These are aimed to fix issues in 3.9.

Mikey