Skip to content

powerpc: HFSCR enablement for POWER8

Michael Neuling linuxppc-dev 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

v2 from the cover letter

Make description of the HFSCR more verbose as suggested by benh.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2powerpc: Add HFSCR SPR definitionsarch/powerpc/include/asm/reg.h+6 -00 replies
2/2powerpc: Setup in HFSCR for POWER8arch/powerpc/kernel/cpu_setup_power.S+8 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] powerpc: HFSCR enablement for POWER8

Benh,

This small series adds support for the HFSCR (Hypervisor Facility Status & Control Register) in POWER8. It just sets the bits we know about at this stage. This is useful only when MSR HV=1.

The HFSCR is the same as the FSCR except it's for hypervisors. It controls the available of various facilities in OS and userspace levels. It also indicates the cause of a hypervisor facility unavailable interrupt (although we are not using this here).

v2:
Make description of the HFSCR more verbose as suggested by benh.

Mikey