Skip to content

Add a new USB audio quirk for the NuForce UDH-100 device. Interface 1 does not exist and Interface 0 should be ignored. Before this patch, the device would not show up in /dev/snd (and dmesg showed Error -5 from the snd-alsa-usb module); after this patch, the device shows up correctly in /dev/snd and ALSA/Pulseaudio can access it.

David Helstroom alsa-devel lkml 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1Add a new USB audio quirk for the NuForce UDH-100 device. Interface 1 does not exist and Interface 0 should be ignored. Before this patch, the device would not show up in /dev/snd (and dmesg showed Error -5 from the snd-alsa-usb module); after this patch, the device shows up correctly in /dev/snd and ALSA/Pulseaudio can access it.sound/usb/quirks-table.h+32 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread