Skip to content

Tegra114: MMC: Add MMC driver for T114/Dalmore

Tom Warren u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest4 patches 0 repliesNew
  2. v14 patches 0 repliesSuperseded

Changes in v2 from the cover letter

- Remove SDIOCFG_HSM define, unused
- Remove I2C retries
- Change CONFIG_ENV_OFFSET to match Dalmore's eMMC chip boot part size

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for now)arch/arm/dts/tegra114.dtsi board/nvidia/dts/tegra114-dalmore.dts+45 -00 replies
2/4Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config tablearch/arm/include/asm/arch-tegra114/gp_padctrl.h board/nvidia/dalmore/dalmore.c board/nvidia/dalmore/pinmux-config-dalmore.h+16 -00 replies
3/4Tegra114: MMC: Add SD bus power-rail init routineboard/nvidia/dalmore/dalmore.c+62 -00 replies
4/4Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore boardsinclude/configs/dalmore.h+11 -11 reply

Reviews trailers per patch

All 4 patches have a Reviewed-by or Acked-by.

PatchStephen Warren
1/4R-b
2/4R-b
3/4R-b
4/4R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 0/4] Tegra114: MMC: Add MMC driver for T114/Dalmore

This patchset adds SDMMC device-tree support to the Tegra114 dts files, and enables the Tegra MMC driver on Tegra114 Dalmore.

Tested on my Dalmore E1611 board, eMMC and SD-Card work fine, can load a kernel off of a SD card OK, card detect works, and the env is now stored in eMMC (end of the 2nd 'boot' sector, same as Tegra20/30).

Changes in v2:
- Remove SDIOCFG_HSM define, unused
- Remove I2C retries
- Change CONFIG_ENV_OFFSET to match Dalmore's eMMC chip boot part size

Tom Warren (4):
Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for
now)
Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table
Tegra114: MMC: Add SD bus power-rail init routine
Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore
boards

 arch/arm/dts/tegra114.dtsi                      | 32 ++++++++++++
 arch/arm/include/asm/arch-tegra114/gp_padctrl.h |  6 +++
 board/nvidia/dalmore/dalmore.c                  | 67 +++++++++++++++++++++++++
 board/nvidia/dalmore/pinmux-config-dalmore.h    |  6 +++
 board/nvidia/dts/tegra114-dalmore.dts           | 13 +++++
 include/configs/dalmore.h                       | 12 ++++-
 6 files changed, 135 insertions(+), 1 deletion(-)
Signature · 1 line
1.8.1.5