Skip to content

mx23: Make DDR initialization stable

Fabio Estevam u-boot 3 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest7 patches 0 repliesNew
  2. v47 patches 0 repliesSuperseded
  3. v37 patches 0 repliesSuperseded

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/7mx23: Fix pad voltage selection bitarch/arm/include/asm/arch-mxs/iomux.h+4 -00 replies
2/7mx23evk: Fix DDR pin iomux settingsboard/freescale/mx23evk/spl_boot.c+1 -10 replies
3/7mx23_olinuxino: Fix DDR pin iomux settingsboard/olimex/mx23_olinuxino/spl_boot.c+1 -10 replies
4/7mxs: spl_mem_init: Fix comment about start bitarch/arm/cpu/arm926ejs/mxs/spl_mem_init.c+1 -10 replies
5/7mxs: spl_mem_init: Remove erroneous DDR settingarch/arm/cpu/arm926ejs/mxs/spl_mem_init.c+0 -40 replies
6/7mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registersarch/arm/cpu/arm926ejs/mxs/spl_mem_init.c+15 -20 replies
7/7mxs: spl_mem_init: Change EMI port priorityarch/arm/cpu/arm926ejs/mxs/spl_mem_init.c+1 -10 replies

Reviews trailers per patch

1 of 7 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchMarek Vasut
SeriesA-b
1/7A-b
2/7
3/7
4/7
5/7
6/7
7/7

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable

Prior to this series running 'memtester' utility in Linux on a mx23evk always resulted in many errors during stress testing, if the kernel is loaded via U-boot.

Running the same test and loading the kernel via FSL bootlets resulted on zero errors.

Adjust U-boot so that it can also pass the 'memtester' stress test.

After this series was applied, no more DDR errors were observed on a mx23evk.