Skip to content

Upgrade BeagleBone kernel to 3.8

Anders Darander buildroot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5beaglebone: update to linux 3.8board/beaglebone/linux-3.2.9.config board/beaglebone/linux-3.8.config configs/beaglebone_defconfig+321 -2681 reply
2/5beaglebone: reduce defconfigboard/beaglebone/linux-3.8.config+33 -1471 reply
3/5am33x-cm3: add FW for suspend/resumepackage/Config.in package/am33x-cm3/Config.in package/am33x-cm3/am335x-pm-firmware-load +1 more+37 -01 reply
4/5beaglebone: add am33x-cm3configs/beaglebone_defconfig+1 -00 replies
5/5beaglebone: enable NFS rootboard/beaglebone/linux-3.8.config+2 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [Buildroot] [PATCH 0/5] Upgrade BeagleBone kernel to 3.8

From: Anders Darander <[email protected]>

Hi,

(I'm resending this series from a subscribed address).

This patch series upgrades the kernel for the BeagleBone to 3.8.

The 3.8 kernel is taken from TI's own repo, and the actual branch/commit used are the same as currently being used in their own BSP (see meta-ti for OpenEmbedded / Yocto).

As the BB support is being mainlined, the old board-setup has been removed, thus the 3.8 kernel requires the use of a device tree. (A DTS, am33x-bone.dts is included in the kernel).

The new package, am33x-cm3, consists of the FW blob for the Cortex M3 on the BB that handles the power management of the board. Without this firmware loaded, even a simple reboot won't succeed. In the old 3.2 kernel, this was compiled in as a part of the kernel, however, in the 3.8 kernel, it has to be loaded during the runtime.

The last patch in the series (0005-beaglebone-enable-NFS-root.patch) is not necessary; it's only my preferred way of testing.

Cheers,
Anders

Anders Darander (5):
beaglebone: update to linux 3.8
beaglebone: reduce defconfig
am33x-cm3: add FW for suspend/resume
beaglebone: add am33x-cm3
beaglebone: enable NFS root

 board/beaglebone/linux-3.2.9.config       |  252 -----------------------------
 board/beaglebone/linux-3.8.config         |  203 +++++++++++++++++++++++
 configs/beaglebone_defconfig              |   23 +--
 package/Config.in                         |    1 +
 package/am33x-cm3/Config.in               |    4 +
 package/am33x-cm3/am335x-pm-firmware-load |    6 +
 package/am33x-cm3/am33x-cm3.mk            |   26 +++
 7 files changed, 247 insertions(+), 268 deletions(-)
 delete mode 100644 board/beaglebone/linux-3.2.9.config
 create mode 100644 board/beaglebone/linux-3.8.config
 create mode 100644 package/am33x-cm3/Config.in
 create mode 100755 package/am33x-cm3/am335x-pm-firmware-load
 create mode 100644 package/am33x-cm3/am33x-cm3.mk
Signature · 1 line
1.7.10.4