drm/tilcdc: bug fixes, mode selection improvements

The series of patches that follow are intended to address issues that have been found in the tilcdc drm driver. The patchset enables support for screen resolutions with horizontal resolutions greater than 1024 pixels. The patchset also addresses a limitation where certain monitor timings would overflow LCD controller timing registers causing either no monitor signal or a very corrupted display. This patchset will stop monitor modes from being reported as valid if the lcd controller cannot support them.

V2:
Fix typos in commit messages
Add a patch that enables runtime modesetting to work correctly Fix an issue where the slave encoder can initialize before the i2c
subsystem, resulting in no displays being configured.

Applies cleanly on drm-next.

Darren Etheridge (6):
drm/tilcdc: support pixel widths greater than 1024 drm/tilcdc: adding some more devicetree config drm/tilcdc: fixing off by one errors found on analyzer drm/tilcdc: adding more guards to prevent selection of invalid modes drm/tilcdc: whitespace fixes and tidyup
drm/tilcdc fixing i2c/slave initialization race

Pantelis Antoniou (1):
drm/tilcdc: Clear bits of register we're going to set.

 .../devicetree/bindings/drm/tilcdc/tilcdc.txt      |    8 ++
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c               |  117 +++++++++++++++++--
 drivers/gpu/drm/tilcdc/tilcdc_drv.c                |   25 ++++-
 drivers/gpu/drm/tilcdc/tilcdc_drv.h                |   24 ++++-
 drivers/gpu/drm/tilcdc/tilcdc_regs.h               |    1 +
 drivers/gpu/drm/tilcdc/tilcdc_slave.c              |   53 +++++----
 6 files changed, 189 insertions(+), 39 deletions(-)