Skip to content

Stefano Babic u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5phy: add missing constants for Micrel KSZ9031include/micrel.h+5 -00 replies
2/5net: fix mask for phy Micrel KSZ9031drivers/net/phy/micrel.c+1 -10 replies
3/5net: add extended function to phy APIinclude/phy.h+3 -00 replies
4/5net: add function to read/write extended registers in Micrel Phydrivers/net/phy/micrel.c+32 -00 replies
5/5net: add support for extended registers to mdio commandcommon/cmd_mdio.c+59 -160 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH v1 0/5]

Some phys have additional registers that are not covered by standard. Access to this registers can be done via specific sequence according to the phy datasheet. The driver for Micrel phy contains some additional function, that the board maintainer can call to tune the phy. However, these registers cannot be accessed with "mmdio" command.

Add calback to the phy API to allow to call the function for reading / writing extended registers with the mmdio command.

Stefano Babic (5):
phy: add missing constants for Micrel KSZ9031
net: fix mask for phy Micrel KSZ9031
net: add extended function to phy API
net: add function to read/write extended registers in Micrel Phy
net: add support for extended registers to mdio command

 common/cmd_mdio.c        |   75 ++++++++++++++++++++++++++++++++++++----------
 drivers/net/phy/micrel.c |   34 ++++++++++++++++++++-
 include/micrel.h         |    5 ++++
 include/phy.h            |    3 ++
 4 files changed, 100 insertions(+), 17 deletions(-)
Signature · 1 line
1.7.9.5