Skip to content

edac, highbank: Add Calxeda ECX-2000 support

Robert Richter lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 3 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5edac, highbank: Fix interrupt setup of mem and l2 controllerdrivers/edac/highbank_l2_edac.c drivers/edac/highbank_mc_edac.c+20 -160 replies
2/5ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsiDocumentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt arch/arm/boot/dts/ecx-2000.dts arch/arm/boot/dts/ecx-common.dtsi +1 more+15 -70 replies
3/5edac, highbank: Add Calxeda ECX-2000 supportdrivers/edac/highbank_mc_edac.c+70 -350 replies
4/5edac, highbank: Improve and unify namingdrivers/edac/highbank_l2_edac.c drivers/edac/highbank_mc_edac.c+13 -90 replies
5/5edac: Unify reporting of device info for device, mc and pcidrivers/edac/edac_device.c drivers/edac/edac_mc.c drivers/edac/edac_pci.c+10 -131 reply

Reviews trailers per patch

1 of 5 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchRob HerringBorislav Petkov
SeriesA-b
1/5
2/5
3/5
4/5
5/5A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/5] edac, highbank: Add Calxeda ECX-2000 support

This patch series enables ECC edac support for Calxeda ECX-2000 (Midway). The ECX-2000 memory controller is similar to Highbank but has different register bases for error and interrupt registers.

Testing the driver uncovered a bug in the interrupt initialization. So there is also a fix for this for all the Highbank edac drivers. The interrupt was enabled too early which caused a crash if there are interrupts pending (ECC errors) during driver initialization.

Also some improvements and unification of edac log messages I found useful.

-Robert

Rob Herring (1):
ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi

Robert Richter (4):
edac, highbank: Fix interrupt setup of mem and l2 controller edac, highbank: Add Calxeda ECX-2000 support
edac, highbank: Improve and unify naming
edac: Unify reporting of device info for device, mc and pci

 .../devicetree/bindings/arm/calxeda/mem-ctrlr.txt  |   4 +-
 arch/arm/boot/dts/ecx-2000.dts                     |   6 +
 arch/arm/boot/dts/ecx-common.dtsi                  |   6 -
 arch/arm/boot/dts/highbank.dts                     |   6 +
 drivers/edac/edac_device.c                         |   9 +-
 drivers/edac/edac_mc.c                             |   6 +-
 drivers/edac/edac_pci.c                            |   8 +-
 drivers/edac/highbank_l2_edac.c                    |  33 +++---
 drivers/edac/highbank_mc_edac.c                    | 128 +++++++++++++--------
 9 files changed, 127 insertions(+), 79 deletions(-)
Signature · 1 line
1.8.4.rc3