Skip to content

omapdss: hdmi: Add support for hdmi on OMAP5 and DRA7x SoCs

Archit Taneja linux-fbdev linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6omapdss: hdmi: support larger register offsets for OMAP5 HDMI coredrivers/video/omap2/dss/hdmi.h+2 -20 replies
2/6omapdss: hdmi: Add initial OMAP5/DRA7x HDMI core IP librarydrivers/video/omap2/dss/hdmi5_core.c drivers/video/omap2/dss/hdmi5_core.h+1107 -00 replies
3/6omapdss: hdmi phy: Incorporate changes for OMAP5/DRA7xdrivers/video/omap2/dss/hdmi.h drivers/video/omap2/dss/hdmi_phy.c+93 -20 replies
4/6omapdss: hdmi pll: Incorporate changes for OMAP5/DRA7xdrivers/video/omap2/dss/hdmi_pll.c+71 -30 replies
5/6omapdss: hdmi: add OMAP5/DRA7x hdmi driverdrivers/video/omap2/dss/Kconfig drivers/video/omap2/dss/Makefile drivers/video/omap2/dss/core.c +4 more+722 -20 replies
6/6omapdss: hdmi4/hdmi5: set regulator voltage to required leveldrivers/video/omap2/dss/hdmi4.c drivers/video/omap2/dss/hdmi5.c+10 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/6] omapdss: hdmi: Add support for hdmi on OMAP5 and DRA7x SoCs

The HDMI IP on OMAP5/DRA7xx has very similar wrapper, PLL and PHY sub blocks found in OMAP4 DSS. However, the HDMI core IP(which implements the HDMI protocol) is completely new.

Create a library for configuring the new HDMI core IP, make minor modifications in PLL and PHY. And finally, add a hdmi5 driver. This driver can eventually be merged with the hdmi4 driver such that both of them use the same driver, we would need to create core IP ops for that, we've left that for later.

Archit Taneja (6):
omapdss: hdmi: support larger register offsets for OMAP5 HDMI core
omapdss: hdmi: Add initial OMAP5/DRA7x HDMI core IP library
omapdss: hdmi phy: Incorporate changes for OMAP5/DRA7x
omapdss: hdmi pll: Incorporate changes for OMAP5/DRA7x
omapdss: hdmi: add OMAP5/DRA7x hdmi driver
omapdss: hdmi4/hdmi5: set regulator voltage to required level

 drivers/video/omap2/dss/Kconfig      |  10 +
 drivers/video/omap2/dss/Makefile     |   2 +
 drivers/video/omap2/dss/core.c       |   6 +
 drivers/video/omap2/dss/dss.h        |   3 +
 drivers/video/omap2/dss/hdmi.h       |   7 +-
 drivers/video/omap2/dss/hdmi4.c      |   5 +
 drivers/video/omap2/dss/hdmi5.c      | 704 ++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/hdmi5_core.c | 812 +++++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/hdmi5_core.h | 298 +++++++++++++
 drivers/video/omap2/dss/hdmi_phy.c   |  94 +++-
 drivers/video/omap2/dss/hdmi_pll.c   |  74 +++-
 drivers/video/omap2/dss/hdmi_wp.c    |   2 +-
 12 files changed, 2008 insertions(+), 9 deletions(-)
 create mode 100644 drivers/video/omap2/dss/hdmi5.c
 create mode 100644 drivers/video/omap2/dss/hdmi5_core.c
 create mode 100644 drivers/video/omap2/dss/hdmi5_core.h
Signature · 1 line
1.8.1.2