Skip to content

net: hwmon fixes

Guenter Roeck lm-sensors netdev 1 version Applied

Status from this message: Applied, thanks.

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 21 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/5tg3: Convert to use hwmon_device_register_with_groupsdrivers/net/ethernet/broadcom/tg3.c+6 -195 replies
2/5igb: Convert to use devm_hwmon_device_register_with_groupsdrivers/net/ethernet/intel/igb/igb.h drivers/net/ethernet/intel/igb/igb_hwmon.c+53 -551 reply
3/5ixgbe: Convert to use devm_hwmon_device_register_with_groupsdrivers/net/ethernet/intel/ixgbe/ixgbe.h drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c+36 -481 reply
4/5igb: Start temperature sensor attribute index with 1drivers/net/ethernet/intel/igb/igb_hwmon.c+4 -42 replies
5/5ixgbe: Start temperature sensor attribute index with 1drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c+4 -43 replies

Reviews trailers per patch

3 of 5 patches have a Reviewed-by or Acked-by.

PatchJean DelvareNithin Nayak Sujir
1/5R-b A-b
2/5
3/5
4/5R-b
5/5R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/5] net: hwmon fixes

The hwmon subsystem is used by various network drivers to report temperature sensor and other information. Unfortunately, its use is often not correct. Typical errors are that the mandatory name sysfs attribute is not created, that the temperature sensor index starts with 0 instead of 1, and/or that sysfs attributes are created after the hwmon device was created. The following sequence of patches fixes most of the problems.

The igb patches have been tested with real hardware; the others are compile tested only.

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors