Skip to content

N900 DT support for N900 panel

Sebastian Reichel linux-devicetree linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5OMAPDSS: ACX565AKM: Add basic DT supportdrivers/video/omap2/displays-new/panel-sony-acx565akm.c+29 -00 replies
2/5DTS: ARM: OMAP3-N900: Add vendor prefixes to SPI devicesarch/arm/boot/dts/omap3-n900.dts+2 -20 replies
3/5DTS: ARM: OMAP3-N900: Add reset gpio to lcd nodearch/arm/boot/dts/omap3-n900.dts+3 -00 replies
4/5OMAPDSS: SDI: Use V28 as regulator for N900drivers/video/omap2/dss/sdi.c+7 -10 replies
5/5Documentation: dt: Document ACX565AKM DT bindingDocumentation/devicetree/bindings/video/sony,acx565akm.txt+22 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/5] N900 DT support for N900 panel

Hi,

This patchset adds DT support for the N900 panel. The panel bindings will be extended once omapdss has DT support. Until then the panel driver defaults to omapdss.sdi0 in DT mode.

-- Sebastian

Sebastian Reichel (5):
OMAPDSS: ACX565AKM: Add basic DT support
DTS: ARM: OMAP3-N900: Add vendor prefixes to SPI devices
DTS: ARM: OMAP3-N900: Add reset gpio to lcd node
OMAPDSS: SDI: Use V28 as regulator for N900
Documentation: dt: Document ACX565AKM DT binding

 .../devicetree/bindings/video/sony,acx565akm.txt   | 22 ++++++++++++++++
 arch/arm/boot/dts/omap3-n900.dts                   |  7 ++++--
 .../omap2/displays-new/panel-sony-acx565akm.c      | 29 ++++++++++++++++++++++
 drivers/video/omap2/dss/sdi.c                      |  8 +++++-
 4 files changed, 63 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/sony,acx565akm.txt
Signature · 1 line
1.8.4.3