hw/arm: add initial support for Canon DIGIC SoC
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest6 patches 1 replyIn review
Changes since v9 from the cover letter
1. rebase over Peter Crosthwaite's "Fix Support for ARM CBAR and reset-hivecs" v5 patch series
2. qom-test: add "canon-a1100" to arm machines list
3. include a diffstat in the cover letter (--cover-letter option)
4. fix patches timestamp
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/6 | hw/arm: add very initial support for Canon DIGIC SoCdefault-configs/ hw/ hw/ +1 more | +108 | 0 replies | |
| 2/6 | hw/arm/digic: prepare DIGIC-based boards supporthw/ hw/ tests/ | +86 | 0 replies | |
| 3/6 | hw/arm/digic: add timer supporthw/ hw/ hw/ +2 more | +244 | 0 replies | |
| 4/6 | hw/arm/digic: add UART supporthw/ hw/ hw/ +2 more | +261 | 0 replies | |
| 5/6 | hw/arm/digic: add NOR ROM supporthw/ | +70 | 0 replies | |
| 6/6 | MAINTAINERS: Document 'Canon DIGIC' machineMAINTAINERS | +6 | 0 replies |
Reviews trailers per patch
3 of 6 patches have a Reviewed-by or Acked-by.
| Patch | Andreas Färber | Peter Maydell | Peter Crosthwaite |
|---|---|---|---|
| 1/6 | R-b | R-b | R-b |
| 2/6 | |||
| 3/6 | R-b | ||
| 4/6 | R-b | R-b | |
| 5/6 | |||
| 6/6 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.
Cover letter [Qemu-devel] [PATCH 0/6] hw/arm: add initial support for Canon DIGIC SoC
Changes since v9:
1. rebase over Peter Crosthwaite's "Fix Support for ARM CBAR and reset-hivecs" v5 patch series
2. qom-test: add "canon-a1100" to arm machines list
3. include a diffstat in the cover letter (--cover-letter option)
4. fix patches timestamp
Changes since v8:
1. digic-timer: move hardware-related macros to the header file
2. digic-timer: use extract32 instead of & >> logic
3. digic-timer, digic-uart: move header files to include/hw/...
4. digic-timer, digic-uart: fix other trivial stuff
fix emptyline; also add "/*< private >*/" and "/*< public >*/"
5. fix patches timestamp
Changes since v7:
1. change "fprintf(stderr," -> "error_report("
(thanks to Peter Crosthwaite)
2. fix digic_timer
* use ptimer in continuous mode according to Peter Crosthwaite's recommendations;
* implement the 'control' and 'reload value' registers.
3. fix patches timestamp
Changes since v6:
1. rebase over Peter Crosthwaite's "Fix Support for ARM CBAR and reset-hivecs" v4 patch series
2. digic_boards: drop start_addr
so the line 's->digic->cpu.env.regs[15] = board->start_addr;' has gone
3. hw/arc/digic: use "reset-hivecs" ARM CPU property
4. add a record to the MAINTAINERS file
Changes since v5:
1. rebase over latest master
2. digic_timer: add a reset function
3. digic_timer: add a VMStateDescription
4. digic_timer: fix whitespaces
5. digic_boards: fix whitespaces
6. move misplaced DIGIC_ROM* definitions
to the "hw/arm/digic: add NOR ROM support" patch
Changes since v4:
1. digic.h: parent_obj: change type Object -> DeviceState
2. digic-uart: drop reg array
3. digic_boards: fix K8P3215UQB comment
4. Makefile: place digic stuff in own line
5. drop cpu-qom.h inclusion
6. digic.h: add private/public labels
7. digic.h: fix guard macro
8. move base address macros to digic.c
9. fix header comments
Changes since v3:
1. fix typos and formatting
2. digic-timer: drop DPRINTF
3. digic-timer: fix DIGIC4_TIMER_BASE() macro
4. digic.c: fix max timer device string
Changes since v2:
1. rebase over latest master;
* pass available size to object_initialize().
2. digic-uart: qemu_log: use LOG_UNIMP instead LOG_GUEST_ERROR;
3. digic-boards: update rom image load code: introduce digic_load_rom().
Changes since v1:
0. drop the "add ARM946E-S CPU" patch;
1. convert to QOM, split DIGIC SoC code and board code
(thanks to Andreas Fa:rber, Peter Maydell and Peter Crosthwaite);
2. fix digic-uart (many thanks to Peter Crosthwaite
for his comments); 3. digic-boards: digic4_add_k8p3215uqb_rom(): update rom image load code: use the '-bios' option.
DIGIC is Canon Inc.'s name for a family of SoC for digital cameras and camcorders.
See http://en.wikipedia.org/wiki/DIGIC for details.
There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors.
Also this patch series adds initial support for Canon PowerShot A1100 IS compact camera (it is my only camera with connected UART interface). As the DIGIC-based cameras differences mostly are insignificant (e.g. RAM-size, ROM type and size, GPIO usage) the other compact and DSLR cameras support can be easily added.
This DIGIC support patch series is inspired
by EOS QEMU from Magic Lantern project.
The main differences:
* EOS QEMU uses home-brew all-in-one monolith design; this patch series uses conventional QEMU object-centric design;
* EOS QEMU tries provide simplest emulation for most controllers inside SoC to run Magic Lantern firmware; this patch series provide more complete support
only for core devices to run barebox bootloader.
** EOS QEMU does not support timer counting
(this patch series emulate 1 MHz counting);
** EOS QEMU support DIGIC UART only for output character to stderr; (this patch series emulate introduces full blown UART interface);
** EOS QEMU has incomplete ROM support;
(this patch series uses conventional QEMU pflash).
This initial DIGIC support can't be used to run the original camera firmware, but it can successfully run experimental version of barebox bootloader (see http://www.barebox.org).
The last sources of barebox for PowerShot A1100 can be obtained here:
https://github.com/frantony/barebox/tree/next.digic.20131213
The precompiled ROM image usable with QEMU can be obtained here:
https://github.com/frantony/barebox/raw/next.digic.20131213/canon-a1100-rom1.bin
Download this ROM image and just run QEMU:
qemu-system-arm -M canon-a1100 -serial stdio
Short build instruction for QEMU bios image (canon-a1100-rom1.bin):
$ git clone https://github.com/frantony/barebox -b next.digic.20131213 $ cd barebox $ export ARCH=arm $ export CROSS_COMPILE=<your ARM cross-compiler prefix> $ make canon-a1100_defconfig $ make $ ./mk-canon-a1100-rom1.sh
This ROM image (after "dancing bit" encoding) can be run on real Canon A1100 camera.
The short build instruction for __previous__ DIGIC barebox version (it can be used with more recent sources too) can be obtained here:
http://lists.infradead.org/pipermail/barebox/2013-August/016007.html
Antony Pavlov (6):
hw/arm: add very initial support for Canon DIGIC SoC hw/arm/digic: prepare DIGIC-based boards support hw/arm/digic: add timer support hw/arm/digic: add UART support hw/arm/digic: add NOR ROM support
MAINTAINERS: Document 'Canon DIGIC' machine
MAINTAINERS | 6 ++ default-configs/arm-softmmu.mak | 1 + hw/arm/Makefile.objs | 2 + hw/arm/digic.c | 115 ++++++++++++++++++++++++ hw/arm/digic_boards.c | 154 +++++++++++++++++++++++++++++++ hw/char/Makefile.objs | 1 + hw/char/digic-uart.c | 195 ++++++++++++++++++++++++++++++++++++++++ hw/timer/Makefile.objs | 1 + hw/timer/digic-timer.c | 163 +++++++++++++++++++++++++++++++++ include/hw/arm/digic.h | 43 +++++++++ include/hw/char/digic-uart.h | 47 ++++++++++ include/hw/timer/digic-timer.h | 46 ++++++++++ tests/qom-test.c | 1 + 13 files changed, 775 insertions(+) create mode 100644 hw/arm/digic.c create mode 100644 hw/arm/digic_boards.c create mode 100644 hw/char/digic-uart.c create mode 100644 hw/timer/digic-timer.c create mode 100644 include/hw/arm/digic.h create mode 100644 include/hw/char/digic-uart.h create mode 100644 include/hw/timer/digic-timer.h
Signature · 1 line
1.8.5