Skip to content

Basic support for inforce IFC6410 board

Rob Clark linux-arm-msm 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 7 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3mach-msm: add aqp8064 debug uartarch/arm/Kconfig.debug arch/arm/include/debug/msm.S+14 -02 replies
2/3mach-msm: enable sparsemem for 8960arch/arm/mach-msm/Kconfig arch/arm/mach-msm/include/mach/memory.h+25 -01 reply
3/3RFC: mach-msm: add DT for ifc6410 (apq8064)arch/arm/boot/dts/qcom-apq8064-ifc6410.dts arch/arm/mach-msm/board-dt.c+132 -04 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] Basic support for inforce IFC6410 board

Couple little patches, plus work-in-progress DT file for the IFC6410. With this, plus the msm clk support[1], I have serial console working on top of 3.13-rc4. The debug UART patch is not strictly required, but it is a lot easier to debug when you can see what is going on in early boot before the serial driver is up.

[1] http://www.spinics.net/lists/devicetree/msg08409.html

Rob Clark (3):
mach-msm: add aqp8064 debug uart
mach-msm: enable sparsemem for 8960
RFC: mach-msm: add DT for ifc6410 (apq8064)

 arch/arm/Kconfig.debug                     |   9 ++
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 131 +++++++++++++++++++++++++++++
 arch/arm/include/debug/msm.S               |   5 ++
 arch/arm/mach-msm/Kconfig                  |   3 +
 arch/arm/mach-msm/board-dt.c               |   1 +
 arch/arm/mach-msm/include/mach/memory.h    |  22 +++++
 6 files changed, 171 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
 create mode 100644 arch/arm/mach-msm/include/mach/memory.h
Signature · 1 line
1.8.4.2