Skip to content

Use zImage for Wandboard

John Weber yocto-meta-freescale 1 version Applied

Status from this message: Queued in my tree.

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 2 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2wandboard: Set KERNEL_IMAGETYPE to zImageconf/machine/include/wandboard.inc+2 -01 reply
2/2u-boot-fslc: make wandboard use zImage by defaultrecipes-bsp/u-boot/u-boot-fslc/0001-wandboard-Set-default-environment-to-use-zImage.patch recipes-bsp/u-boot/u-boot-fslc_2013.10.bbappend+101 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [meta-fsl-arm-extra][PATCH 0/2] Use zImage for Wandboard

These two patches go together. The first one changes KERNEL_IMAGETYPE to zImage. This causes the kernel build to produce and install a zImage rather than a uImage (U-boot formatted kernel image). uImage requires that LOADADDR be assigned during kernel build, and that it be the same as the default loadaddr in the u-boot environment. This change simplifies the process by reducing the need for LOADADDR entirely, allowing u-boot to load zImage anywhere.

The second patch changes the default u-boot environment to use zImage via a bbappend and patch to u-boot-fslc.

These have been tested to work with 3.0.35 kernels, as well as 3.10.17 kernels with flattened device trees.

John Weber (2):
wandboard: Set KERNEL_IMAGETYPE to zImage
u-boot-fslc: make wandboard use zImage by default

 conf/machine/include/wandboard.inc                 |    2 +
 ...ard-Set-default-environment-to-use-zImage.patch |   95 ++++++++++++++++++++
 recipes-bsp/u-boot/u-boot-fslc_2013.10.bbappend    |    6 ++
 3 files changed, 103 insertions(+)
 create mode 100644 recipes-bsp/u-boot/u-boot-fslc/0001-wandboard-Set-default-environment-to-use-zImage.patch
 create mode 100644 recipes-bsp/u-boot/u-boot-fslc_2013.10.bbappend
Signature · 1 line
1.7.9.5