Skip to content

Introducing the Broadcom bcm281xx Architecture

Darwin Rambo u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 0 repliesNew

Changes in v1 from the cover letter

----------
Delete lowlevel_init.S and create s_init.c. File header cleanup, cosmetic changes, dead code removal. Create include/bitfield.h. Use get_ram_size(). Use weak timer_init(); Skip lowlevel init. Remove memory test config. Use standard baud table and prompt.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6arch: kona: Initial commit of kona-common architecture codearch/arm/cpu/armv7/Makefile arch/arm/cpu/armv7/kona-common/Makefile arch/arm/cpu/armv7/kona-common/clk-stubs.c +4 more+100 -00 replies
2/6arch: bcm281xx: Initial commit of bcm281xx architecture codearch/arm/cpu/armv7/bcm281xx/Makefile arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c arch/arm/cpu/armv7/bcm281xx/clk-bsc.c +7 more+1790 -00 replies
3/6gpio: kona: Add Kona gpio driverdrivers/gpio/Makefile drivers/gpio/kona_gpio.c+142 -00 replies
4/6i2c: kona: Add Kona I2C driverdrivers/i2c/Makefile drivers/i2c/kona_i2c.c+731 -00 replies
5/6mmc: kona: Add Kona mmc driverdrivers/mmc/Makefile drivers/mmc/kona_sdhci.c+126 -01 reply
5/6mmc: kona: Add Kona mmc driver+0 -00 replies
6/6board: bcm28155_ap: Add board filesboard/broadcom/bcm28155_ap/Makefile board/broadcom/bcm28155_ap/bcm28155_ap.c boards.cfg +1 more+235 -00 replies

Reviews trailers per patch

All 7 patches have a Reviewed-by or Acked-by.

PatchSteve RaeTim KrygerMarkus Mayer
1/6R-b R-b
2/6R-b R-b
3/6R-b R-b R-b
4/6R-b R-b
5/6R-b R-b
5/6R-b R-b
6/6R-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v1 thread

Cover letter [U-Boot] [PATCH v1 0/6] Introducing the Broadcom bcm281xx Architecture

This patchset introduces the Broadcom bcm281xx family of mobile SoC chips. Broadcom kona hardware blocks are often found in Broadcom mobile SoC chips including the bcm281xx family, so support for some of these kona blocks is also provided here. These patches work on u-boot master as well as the u-boot-arm custodian tree.

v1 changes
----------
Delete lowlevel_init.S and create s_init.c. File header cleanup, cosmetic changes, dead code removal. Create include/bitfield.h. Use get_ram_size(). Use weak timer_init(); Skip lowlevel init. Remove memory test config. Use standard baud table and prompt.

Darwin Rambo (6):
arch: kona: Initial commit of kona-common architecture code
arch: bcm281xx: Initial commit of bcm281xx architecture code
gpio: kona: Add Kona gpio driver
i2c: kona: Add Kona I2C driver
mmc: kona: Add Kona mmc driver
board: bcm28155_ap: Add board files

 arch/arm/cpu/armv7/Makefile                    |    1 +
 arch/arm/cpu/armv7/bcm281xx/Makefile           |   11 +
 arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c     |  523 +++++++++++++++++
 arch/arm/cpu/armv7/bcm281xx/clk-bsc.c          |   52 ++
 arch/arm/cpu/armv7/bcm281xx/clk-core.c         |  513 +++++++++++++++++
 arch/arm/cpu/armv7/bcm281xx/clk-core.h         |  495 ++++++++++++++++
 arch/arm/cpu/armv7/bcm281xx/clk-sdio.c         |   73 +++
 arch/arm/cpu/armv7/bcm281xx/reset.c            |   27 +
 arch/arm/cpu/armv7/kona-common/Makefile        |    9 +
 arch/arm/cpu/armv7/kona-common/clk-stubs.c     |   21 +
 arch/arm/cpu/armv7/kona-common/hwinit-common.c |   16 +
 arch/arm/cpu/armv7/kona-common/s_init.c        |   12 +
 arch/arm/include/asm/arch-bcm281xx/gpio.h      |   15 +
 arch/arm/include/asm/arch-bcm281xx/sysmap.h    |   25 +
 arch/arm/include/asm/kona-common/clk.h         |   29 +
 arch/arm/include/asm/kona-common/kona_sdhci.h  |   12 +
 board/broadcom/bcm28155_ap/Makefile            |    7 +
 board/broadcom/bcm28155_ap/bcm28155_ap.c       |   87 +++
 boards.cfg                                     |    1 +
 drivers/gpio/Makefile                          |    1 +
 drivers/gpio/kona_gpio.c                       |  141 +++++
 drivers/i2c/Makefile                           |    1 +
 drivers/i2c/kona_i2c.c                         |  730 ++++++++++++++++++++++++
 drivers/mmc/Makefile                           |    1 +
 drivers/mmc/kona_sdhci.c                       |  125 ++++
 include/bitfield.h                             |   56 ++
 include/configs/bcm28155_ap.h                  |  140 +++++
 27 files changed, 3124 insertions(+)
 create mode 100644 arch/arm/cpu/armv7/bcm281xx/Makefile
 create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-bcm281xx.c
 create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-bsc.c
 create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-core.c
 create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-core.h
 create mode 100644 arch/arm/cpu/armv7/bcm281xx/clk-sdio.c
 create mode 100644 arch/arm/cpu/armv7/bcm281xx/reset.c
 create mode 100644 arch/arm/cpu/armv7/kona-common/Makefile
 create mode 100644 arch/arm/cpu/armv7/kona-common/clk-stubs.c
 create mode 100644 arch/arm/cpu/armv7/kona-common/hwinit-common.c
 create mode 100644 arch/arm/cpu/armv7/kona-common/s_init.c
 create mode 100644 arch/arm/include/asm/arch-bcm281xx/gpio.h
 create mode 100644 arch/arm/include/asm/arch-bcm281xx/sysmap.h
 create mode 100644 arch/arm/include/asm/kona-common/clk.h
 create mode 100644 arch/arm/include/asm/kona-common/kona_sdhci.h
 create mode 100644 board/broadcom/bcm28155_ap/Makefile
 create mode 100644 board/broadcom/bcm28155_ap/bcm28155_ap.c
 create mode 100644 drivers/gpio/kona_gpio.c
 create mode 100644 drivers/i2c/kona_i2c.c
 create mode 100644 drivers/mmc/kona_sdhci.c
 create mode 100644 include/bitfield.h
 create mode 100644 include/configs/bcm28155_ap.h
Signature · 1 line
1.7.9.5