Skip to content

ipmi: Cleanups for allowing IPMI support to always be "y"

[email protected] linux-acpi lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 6 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3ipmi: Turn off default probing of interfacesdrivers/char/ipmi/Kconfig drivers/char/ipmi/ipmi_si_intf.c+14 -03 replies
2/3ipmi: Turn off all activity on an idle ipmi interfacedrivers/char/ipmi/ipmi_msghandler.c drivers/char/ipmi/ipmi_si_intf.c include/linux/ipmi_smi.h+187 -1022 replies
3/3Change ACPI IPMI support to "default y"drivers/acpi/Kconfig drivers/char/ipmi/Kconfig+3 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] ipmi: Cleanups for allowing IPMI support to always be "y"

Three patches to remove issues with probing interface default, to make sure the driver is completely idle if nothing is happening on it, and to compile the IPMI driver into the kernel if ACPI is enabled.

The ACPI spec really requires that the IPMI driver be built into the kernel because ACPI uses IPMI for some operations. But some people do not want the driver even using the mimimal amount of CPU it uses when idle. And the default probing, even though sort of implied to be required by the spec, is really a bad idea and can result in hangs on systems with other hardware at those location.

Hopefully these patches make everyone happy.