Skip to content

ks8851 DT/regulator/gpio updates

Stephen Boyd linux-arm-kernel linux-arm-msm linux-devicetree lkml netdev 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest4 patches 10 repliesIn review
  2. v15 patches 4 repliesSuperseded

Changes in v2 from the cover letter

* Dropped vendor prefix patch as that should go through DT tree

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4devicetree: bindings: Properly document micrel ks8851 SPI chipsDocumentation/devicetree/bindings/net/micrel-ks8851.txt+12 -39 replies
2/4net: ks8851: Use devm_regulator_get_optional()drivers/net/ethernet/micrel/ks8851.c+3 -80 replies
3/4net: ks8851: Add optional vdd_io regulator and reset gpiodrivers/net/ethernet/micrel/ks8851.c+53 -10 replies
4/4net: ks8851: Add of match tabledrivers/net/ethernet/micrel/ks8851.c+6 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/4] ks8851 DT/regulator/gpio updates

This set of patches properly documents the micrel ks8851 spi ethernet controller, converts to devm_regulator_get_optional() to make error paths slightly simpler, and finally adds supports for another optional regulator and a reset gpio. This allows me to use the ks8851 on my MSM8960 CDP board.

Changes since v1:
* Dropped vendor prefix patch as that should go through DT tree

Stephen Boyd (4):
devicetree: bindings: Properly document micrel ks8851 SPI chips
net: ks8851: Use devm_regulator_get_optional()
net: ks8851: Add optional vdd_io regulator and reset gpio
net: ks8851: Add of match table

 .../devicetree/bindings/net/micrel-ks8851.txt      | 15 ++++-
 drivers/net/ethernet/micrel/ks8851.c               | 71 +++++++++++++++++++---
 2 files changed, 74 insertions(+), 12 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation