Skip to content

arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support

Alison Wang u-boot 4 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest17 patches 0 repliesNew
  2. v51 of 16 patches 0 repliesSuperseded
  3. v2 posting 2/20 of 9 patches 0 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v2 posting 1/20 of 9 patches0 repliesSuperseded

Changes in v6 from the cover letter

- Fix checkpatch warnings.
- Use #define instead of magic numbers.
- Remove redundant codes.
- Give more detail commits.
- Move OCRAM_BASE_ADDR and OCRAM_SIZE to soc config.
- Change NS16550 fdt node's name according the update in kernel.
- Split ESDHC patch into two parts.

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/17arm: ls102xa: Add Freescale LS102xA SoC supportarch/arm/cpu/armv7/ls102xa/Makefile arch/arm/cpu/armv7/ls102xa/clock.c arch/arm/cpu/armv7/ls102xa/cpu.c +13 more+1369 -22 replies
2/17ls102xa: i2c: Add i2c support for LS102xAdrivers/i2c/mxc_i2c.c+2 -20 replies
3/17net: Merge asm/fsl_enet.h into fsl_mdio.harch/powerpc/include/asm/fsl_enet.h board/freescale/mpc8360emds/mpc8360emds.c board/freescale/mpc837xemds/mpc837xemds.c +10 more+17 -350 replies
4/17net: mdio: Use mb() to be compatible for both ARM and PowerPCdrivers/net/fsl_mdio.c+6 -30 replies
5/17ls102xa: etsec: Add etsec support for LS102xAdrivers/net/tsec.c include/tsec.h+13 -10 replies
6/17esdhc: Add CONFIG_SYS_FSL_ESDHC_LE and CONFIG_SYS_FSL_ESDHC_BE macrosdoc/README.fsl-esdhc include/fsl_esdhc.h+18 -10 replies
7/17ls102xa: esdhc: Add esdhc support for LS102xAdrivers/mmc/fsl_esdhc.c+2 -20 replies
8/17driver/ddr/freescale: Add support of accumulate ECCdrivers/ddr/fsl/ctrl_regs.c+5 -00 replies
9/17driver/ddr/freescale: Fix DDR3 driver for ARMdrivers/ddr/fsl/arm_ddr_gen3.c+1 -10 replies
10/17driver/ddr/fsl: Add support of overriding chip select write levelingdrivers/ddr/fsl/ctrl_regs.c drivers/ddr/fsl/interactive.c include/fsl_ddr_sdram.h+7 -00 replies
11/17arm: ls102xa: Add basic support for LS1021AQDS boardarch/arm/Kconfig board/freescale/ls1021aqds/Kconfig board/freescale/ls1021aqds/MAINTAINERS +9 more+1229 -00 replies
12/17arm: ls102xa: Add basic support for LS1021ATWR boardarch/arm/Kconfig board/freescale/ls1021atwr/Kconfig board/freescale/ls1021atwr/MAINTAINERS +5 more+906 -00 replies
13/17net: tsec: Remove tx snooping support from LS1include/tsec.h+4 -00 replies
14/17serial: lpuart: add 32-bit registers lpuart supportdrivers/serial/serial_lpuart.c+118 -00 replies
15/17video: dcu: Add DCU driver supportarch/arm/include/asm/arch-ls102xa/config.h drivers/video/Makefile drivers/video/fsl_dcu_fb.c +1 more+386 -00 replies
16/17video: dcu: Add Sii9022A HDMI Transmitter supportboard/freescale/common/Makefile board/freescale/common/dcu_sii9022a.c board/freescale/common/dcu_sii9022a.h+168 -00 replies
17/17ls102xa: dcu: Add platform support for DCU on LS1021ATWR boardboard/freescale/ls1021atwr/Makefile board/freescale/ls1021atwr/dcu.c board/freescale/ls1021atwr/ls1021atwr.c +1 more+72 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v6 yet.

Read the v6 thread

Cover letter [U-Boot] [PATCH v6 0/17] arm: ls102xa: Add Freescale LS102xA SoC and LS1021AQDS/TWR board support

This series contain the support for Freescale LS102xA SoC and LS1021AQDS/TWR board.

The QorIQ LS1 family is built on Layerscape architecture, the industry's first software-aware, core-agnostic networking architecture to offer unprecedented efficiency and scale.

Freescale LS102xA is a set of SoCs combines two ARM Cortex-A7 cores that have been optimized for high reliability and pack the highest level of integration available for sub-3 W embedded communications processors with Layerscape architecture and with a comprehensive enablement model focused on ease of programmability.

For the detail information about LS1021AQDS/TWR board, please refer to README in the patch.

Change in v6:
- Fix checkpatch warnings.
- Use #define instead of magic numbers.
- Remove redundant codes.
- Give more detail commits.
- Move OCRAM_BASE_ADDR and OCRAM_SIZE to soc config.
- Change NS16550 fdt node's name according the update in kernel.
- Split ESDHC patch into two parts.

Changes in v5:
- Remove private MDIO read/write functions. Handling the board muxing between the RGMII/SGMII phys in eth.c.
- Add detailed commit messages for I2C patch.
- Adjust the video patches' order.
- Remove LETECH patch, as it is used internally, maybe send out later.