net: phy: refactoring and Micrel features

This series fixes a couple of minor issues, refactors phy-driver registration, adds device and device-type abstractions to the micrel driver, and adds support for broadcast disable, led-mode and RMII-reference clock selection for KSZ8081 and KSZ8091 devices.

While adding support for more features for the Micrel PHYs mentioned above, it became apparent that the configuration space is much too large and that adding type-specific callbacks will simply not scale. Instead I added a driver_data field to struct phy_device, which can be used to store static device type data that can be parsed and acted on in generic driver callbacks instead. This allows a lot of duplicated code to be removed, and should make it much easier to add new features or deal with device-type quirks in the future.

This series has been tested on a dual KSZ8081 setup (which wasn't supported until now). Further testing on other Micrel PHYs would be much appreciated.

Note that the final patch effectively reverts the recent commit a95a18afe4c8 ("phy/micrel: KSZ8031RNL RMII clock reconfiguration bug"), which claims that some KSZ8031 PHY become unresponsive if the broadcast disable flag is set before configuring the clock mode, even though disabling the broadcast address is generally the first thing you want to do (e.g. to avoid unnecessary reconfigurations).

Hopefully, the author of that commit (on CC) can confirm whether this is indeed the case, and if so the final patch can be dropped unless it can be worked around in a different way (which I suspect).

Thanks,
Johan

Johan Hovold (22):
dt/bindings: fix documentation of ethernet-phy compatible property
net: phy: add module_phy_driver macro
net: phy: replace phy_driver_register calls
net: phy: replace phy_drivers_register calls
net: phy: micrel: fix config_intr error handling
net: phy: micrel: use BIT macro
net: phy: micrel: refactor broadcast disable
net: phy: micrel: disable broadcast for KSZ8081/KSZ8091
net: phy: micrel: add led-mode sanity check
net: phy: micrel: refactor led-mode error handling
net: phy: micrel: clean up led-mode setup
net: phy: micrel: enable led-mode for KSZ8081/KSZ8091
net: phy: add static data field to struct phy_driver
net: phy: micrel: add device-type abstraction
net: phy: micrel: parse of nodes at probe
net: phy: micrel: add has-broadcast-disable flag to type data
net: phy: micrel: add generic rmii-ref-clk-sel support
net: phy: micrel: add support for rmii_ref_clk_sel to KSZ8081/KSZ8091 dt/bindings: add micrel,rmii_ref_clk_sel_25_mhz to eth-phy binding
net: phy: micrel: refactor interrupt config
net: phy: micrel: add copyright entry
net: phy: micrel: use generic config_init for KSZ8021/KSZ8031

 Documentation/devicetree/bindings/net/micrel.txt |  11 +-
 Documentation/devicetree/bindings/net/phy.txt    |   3 +-
 drivers/net/phy/amd-xgbe-phy.c                   |  15 +-
 drivers/net/phy/amd.c                            |  17 +-
 drivers/net/phy/at803x.c                         |  14 +-
 drivers/net/phy/bcm63xx.c                        |  15 +-
 drivers/net/phy/bcm7xxx.c                        |  15 +-
 drivers/net/phy/bcm87xx.c                        |  14 +-
 drivers/net/phy/broadcom.c                       |  15 +-
 drivers/net/phy/cicada.c                         |  15 +-
 drivers/net/phy/davicom.c                        |  15 +-
 drivers/net/phy/et1011c.c                        |  17 +-
 drivers/net/phy/icplus.c                         |  15 +-
 drivers/net/phy/lxt.c                            |  15 +-
 drivers/net/phy/marvell.c                        |  15 +-
 drivers/net/phy/micrel.c                         | 346 ++++++++++++++---------
 drivers/net/phy/national.c                       |  17 +-
 drivers/net/phy/qsemi.c                          |  17 +-
 drivers/net/phy/realtek.c                        |  13 +-
 drivers/net/phy/smsc.c                           |  14 +-
 drivers/net/phy/ste10Xp.c                        |  15 +-
 drivers/net/phy/vitesse.c                        |  14 +-
 include/linux/micrel_phy.h                       |   1 -
 include/linux/phy.h                              |  26 ++
 24 files changed, 278 insertions(+), 396 deletions(-)

2.0.4