Skip to content

mmc: sdhci: Disable re-tuning for HS400

Adrian Hunter linux-mmc 2 versions – Applied

Status from this message: Thanks! Applied for fixes with Aaron's reviewed by tag. And sorry for the delay.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest4 patches 4 repliesApplied
  2. v13 patches 5 repliesSuperseded

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/4mmc: sdhci: Tuning should not change max_blk_countdrivers/mmc/host/sdhci.c+3 -60 replies
2/4mmc: sdhci: Add out_unlock to sdhci_execute_tuningdrivers/mmc/host/sdhci.c+2 -30 replies
3/4mmc: sdhci: Simplify use of tuning timerdrivers/mmc/host/sdhci.c+8 -150 replies
4/4mmc: sdhci: Disable re-tuning for HS400drivers/mmc/host/sdhci.c include/linux/mmc/sdhci.h+30 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH V2 0/4] mmc: sdhci: Disable re-tuning for HS400

Hi

Here is V2 of patches to disable re-tuning for HS400.

As described in patch 4, re-tuning for HS400 has to be done in HS200 mode, but there is no support for that, so re-tuning needs to be disabled until support is added.

Changes in V2:

Added "mmc: sdhci: Simplify use of tuning timer" patch.

Changed "mmc: sdhci: Disable re-tuning for HS400" so that the tuning timer is not started instead of stopping it when HS400 mode is selected.

Adrian Hunter (4):
mmc: sdhci: Tuning should not change max_blk_count
mmc: sdhci: Add out_unlock to sdhci_execute_tuning
mmc: sdhci: Simplify use of tuning timer
mmc: sdhci: Disable re-tuning for HS400

 drivers/mmc/host/sdhci.c  | 66 ++++++++++++++++++++++++++++++-----------------
 include/linux/mmc/sdhci.h |  1 +
 2 files changed, 43 insertions(+), 24 deletions(-)

Regards
Adrian

Read the cover letter in its thread