Skip to content

Add support for kosagi novena

Sean Cross linux-devicetree linux-pci 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest2 of 3 patches 3 repliesIn review
  2. v23 of 4 patches 6 repliesSuperseded
  3. v12 patches 2 repliesSuperseded

Changes in v3 from the cover letter

- Updated stmpe_touchscreen bindings to match documentation
- Removed bindings for eepromoops, it6251, senoko
- Removed simple-bus and moved regulators into the parent node
- Removed "Peek array power" from hog
- Removed lonely "wakeup" from kpp
- Dropped "add power-supply support" patch

2 of 3 patches are in this archive. The cover letter announces 3.

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3drm/panel: simple: Add Innolux N133HSE panel supportdrivers/gpu/drm/panel/panel-simple.c+26 -00 replies
3/3ARM: dts: imx6q: add Novena boardarch/arm/boot/dts/Makefile arch/arm/boot/dts/imx6q-novena.dts+819 -00 replies

Reviews trailers per patch

None of the 2 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchRob Herring
SeriesA-b
1/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/3] Add support for kosagi novena

The Kosagi Novena mainboard contains an i.MX6, along with a PCI Express slot. This patchset adds device tree support for the Novena mainboard.

Changes since v2:
- Updated stmpe_touchscreen bindings to match documentation
- Removed bindings for eepromoops, it6251, senoko
- Removed simple-bus and moved regulators into the parent node
- Removed "Peek array power" from hog
- Removed lonely "wakeup" from kpp
- Dropped "add power-supply support" patch

Changes since v1:
- Add 'kosagi' to vendor prefixes
- Add LCD panel to simple-panel
- Renamed power-supply to bus-supply
- Replaced devm_regulator_get() with devm_regulator_get_optional()
- Moved regulator_enable to imx6_add_pcie_port()
- Removed fpga@1 from spi definition in dts -- will use overlays instead

Sean Cross (3):
drm/panel: simple: Add Innolux N133HSE panel support
devicetree: bindings: Add vendor prefix for Kosagi
ARM: dts: imx6q: add Novena board

 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/imx6q-novena.dts                 | 818 +++++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c               |  26 +
 4 files changed, 846 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-novena.dts
Signature · 1 line
2.1.3