videomodes: Add support for refresh and pclk_khz to video_get_params()
Ian Campbell u-boot 1 version New
Get series with b4
Patches in v1 No applies recorded yet
Reviews trailers per patch
12 of 18 patches have a Reviewed-by or Acked-by.
| Patch | Ian Campbell | Chen-Yu Tsai |
| 1/17videomodes: Add support for refresh and pclk_khz to video_get_params() | A-b | |
| 2/17sunxi: gpio: Properly sort mux defines by port number | A-b | |
| 3/17sunxi: gpio: Add support for gpio pins on the AXP209 pmic | | |
| 4/17sunxi: video: Drop disabling of backend / lcdc / hdmi encoder on modeset | A-b | |
| 5/17sunxi: video: Improve monitor video-mode option handling | | |
| 6/17sunxi: video: Prepare for lcd support | A-b | |
| 7/17sunxi: video: Modify sunxi_lcdc_pll_set to work with both tcon0 and tcon1 | A-b | |
| 8/17sunxi: video: Move sunxi_drc_init | A-b | |
| 9/17sunxi: video: Add lcd output support | | |
| 10/17sunxi: video: Add suppport SoCs without HDMI, e.g. the A13 and A23 | | |
| 11/17sunxi: video: Add support for VGA via external DACs connected to the LCD pins | A-b | |
| 12/17sunxi: sunxi-common.h: Reduce bootm_size to take the framebuffer into account | A-b | |
| 13/17sunxi: A13-OLinuXino defconfigs: Enable VGA output, add lcd-mode for 7" LCD | A-b | |
| 14/17sunxi: Add 2 defconfigs for using the Olimex 7" lcd with olinuxino boards | | |
| 14/17sunxi: Add 2 defconfigs for using the Olimex 7" lcd with olinuxino boards | | |
| 15/17sunxi: Ippo_q8h defconfigs: Enable the LCD panel found on these tablets. | A-b | T-b |
| 16/17sunxi: video: Remove sunxi_display.enabled variable | A-b | |
| 17/17sunxi: video: Use sunxi_lcdc_get_clk_delay to calculate tcon1 delay | A-b | |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Read the v1 thread →