add support for pmic_arb v2 and correct framework
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v5 Latest2 patches 3 repliesIn review
- v42 patches 7 repliesSuperseded
- v32 patches 9 repliesSuperseded
Earlier versions · 1
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v2 | 2 patches | 7 replies | Superseded |
Changes in v5 from the cover letter
* remove the unmap added in v4 since it is used again and the mapping is managed.
* correct printf formatting for 64bit compilers.
* correct base address for reading the channel table.
Patches in v5 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | spmi: remove wakeup command before slave probedrivers/ | +2 | 0 replies | |
| 2/2 | spmi: pmic_arb: add support for hw version 2Documentation/ drivers/ | +265 | 0 replies |
Reviews trailers per patch
All 2 patches have a Reviewed-by or Acked-by.
| Patch | Stephen Boyd | Sagar Dharia | Josh Cartwright | Ivan T. Ivanov |
|---|---|---|---|---|
| Series | T-b | |||
| 1/2 | R-b | R-b | A-b | |
| 2/2 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.
Cover letter [PATCH V5 0/2] add support for pmic_arb v2 and correct framework
pmic_arb v2 has no support for spmi non-data commands and thus returns -EOPNOTSUPP on .cmd callback. This causes a failure in spmi_drv_probe() which sends a wakeup command to the slave before probing its driver. This patchset removes the wakeup from spmi_drv_probe() since the spmi spec stipulates that a slaves default state is active and doesn't need a wakeup.
Changes from v3 to v4:
* Remove the claim that this is a bug fix off the commit text
* Unmap the core register space as soon as we know that it will not be used
* Assign the core reg space to a local until we know if it appropriate to use it to configure the controller fields (on v1) or unmap it (on v2).
Changes from v4 to v5:
* remove the unmap added in v4 since it is used again and the mapping is managed.
* correct printf formatting for 64bit compilers.
* correct base address for reading the channel table.
Gilad Avidov (2):
spmi: remove wakeup command before slave probe
spmi: pmic_arb: add support for hw version 2
.../bindings/spmi/qcom,spmi-pmic-arb.txt | 6 +- drivers/spmi/spmi-pmic-arb.c | 319 +++++++++++++++++---- drivers/spmi/spmi.c | 9 +- 3 files changed, 267 insertions(+), 67 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation