Skip to content

arm: msm: Use timer DT node for qcom watchdog config

Mathieu Olivari linux-arm-kernel linux-devicetree linux-watchdog lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 9 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3watchdog: qcom: use timer devicetree bindingdrivers/watchdog/qcom-wdt.c+15 -62 replies
2/3ARM: qcom: add description of KPSS WDT for IPQ8064arch/arm/boot/dts/qcom-ipq8064.dtsi+13 -12 replies
3/3ARM: msm: add watchdog entries to DT timer binding docDocumentation/devicetree/bindings/arm/msm/timer.txt+13 -31 reply

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchStephen BoydGuenter Roeck
1/3R-b A-b
2/3R-b A-b
3/3A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] arm: msm: Use timer DT node for qcom watchdog config

This change is done as a follow-up to the following thread:
https://lkml.org/lkml/2014/10/1/436

qcom-wdt is currently assuming the presence of a dedicated node in DT to gets its configuration. However, on msm architecture, the watchdog is usually part of the timer block. So this patch-set is changing the driver and slightly enhancing the timer DT bindings to provide the relevant clocks and interrupts.

Mathieu Olivari (3):
watchdog: qcom: use timer devicetree binding
ARM: qcom: add description of KPSS WDT for IPQ8064
ARM: msm: add watchdog entries to DT timer binding doc

 Documentation/devicetree/bindings/arm/msm/timer.txt | 16 +++++++++++++---
 arch/arm/boot/dts/qcom-ipq8064.dtsi                 | 14 +++++++++++++-
 drivers/watchdog/qcom-wdt.c                         | 21 +++++++++++++++------
 3 files changed, 41 insertions(+), 10 deletions(-)
Signature · 1 line
1.9.1