HID: Support for Lenovo Thinkpad 10 digitizer
Status from this message: Applied, thanks.
Get series with b4
b4 am 1424699565-138045-1-git-send-email-mika.westerberg@linux.intel.comVersions newest first
Patches in v1 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | HID: wacom: Add support for I2C connected devicesdrivers/ | +5 | 2 replies | |
| 2/3 | HID: i2c-hid: Read wMaxInputLength of input report instead of bufsizedrivers/ | +8 | 2 replies | |
| 3/3 | HID: i2c-hid: Add support for ACPI GPIO interruptsdrivers/ | +50 | 5 replies |
Reviews trailers per patch
2 of 3 patches have a Reviewed-by or Acked-by.
| Patch | Benjamin Tissoires |
|---|---|
| 1/3 | R-b |
| 2/3 | |
| 3/3 | A-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/3] HID: Support for Lenovo Thinkpad 10 digitizer
Hi,
Previously I sent a patch that enables GPIO interrupts for i2c-hid. This was not accepted by the community:
https://lkml.org/lkml/2015/1/26/398
However, it turned out that there are actually device(s) out there that need this support. One of them is Lenovo Thinkpad 10. It has touch screen connected to IO-APIC but in addition it includes Wacom digitizer that uses GPIO as an interrupt.
In this version of the patch, I limited the GPIO retrieving code path to be taken only when the device is enumerated from ACPI. This allows DT to use whatever is the appropriate mechanism to represent GPIO/interrupt configuration and still makes current ACPI based devices to work.
The first two patches are needed to get the Wacom digitizer work properly with i2c-hid.
Mika Westerberg (3):
HID: wacom: Add support for I2C connected devices
HID: i2c-hid: Read wMaxInputLength of input report instead of bufsize
HID: i2c-hid: Add support for ACPI GPIO interrupts
drivers/hid/i2c-hid/i2c-hid.c | 76 +++++++++++++++++++++++++++++++++---------- drivers/hid/wacom_wac.c | 5 +++ 2 files changed, 63 insertions(+), 18 deletions(-)
Signature · 1 line
2.1.4