Skip to content

pinctrl for NXP LPC18xx family

Joachim Eastwood linux-arm-kernel linux-devicetree linux-gpio 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 0 repliesNew
  2. v16 patches 0 repliesSuperseded

Changes in v2 from the cover letter

- minor white space fixes
- split pinctrl/gpio patch set
- rebase on v4.1-rc1

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2pinctrl: add lpc18xx pinctrl driverdrivers/pinctrl/Kconfig drivers/pinctrl/Makefile drivers/pinctrl/pinctrl-lpc18xx.c+1154 -00 replies
2/2doc: dt: add documentation for lpc1850-scu pinctrl driverDocumentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt+57 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/2] pinctrl for NXP LPC18xx family

This patch set adds a pinctrl driver for NXP LPC18xx/43xx devices.

The pinctrl driver uses the generic muxing and properties DT bindings as described in pinctrl-bindings.txt. There is still two TODOs left in the pinctrl driver regarding property control of special usb1 pins but I would like it merged regardless of this. Support will be added once I get USB up and running on the MCU.

Checkpatch complains a lot about the driver but that's what you get when you embedd a large function/pin spec table from the data sheet I guess.

Changes since v1:
- minor white space fixes
- split pinctrl/gpio patch set
- rebase on v4.1-rc1

Since there were no comments on v1. I hope that these drivers can make it to Linux 4.1.

There are no dependencies in this patch set. The DTS changes will be sent separately to arm-soc once this patch set goes upstream.

Base support for the NXP LPC18xx family can be found here:
http://marc.info/?l=linux-arm-kernel&m=143016894704253&w=2

Joachim Eastwood (2):
pinctrl: add lpc18xx pinctrl driver
doc: dt: add documentation for lpc1850-scu pinctrl driver

 .../bindings/pinctrl/nxp,lpc1850-scu.txt           |   57 +
 drivers/pinctrl/Kconfig                            |    9 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-lpc18xx.c                  | 1144 ++++++++++++++++++++
 4 files changed, 1211 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
 create mode 100644 drivers/pinctrl/pinctrl-lpc18xx.c
Signature · 1 line
1.8.0