Skip to content

Add Cygnus PCIe Serdes/PHY support

Ray Jui lkml 5 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest2 patches 9 repliesIn review
  2. v42 patches 2 repliesSuperseded
  3. v32 patches 4 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v25 patches1 replySuperseded
v15 patches16 repliesSuperseded

Changes in v5 from the cover letter

- Add comment to explain the required 50 ms wait after PCIe AFE is brought
up
- Change some of 'dev_info' print to 'dev_dbg'

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: Add Cygnus PCIe PHY binding docDocumentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt+47 -00 replies
2/2phy: cygnus: pcie: Add Cygnus PCIe PHY supportdrivers/phy/Kconfig drivers/phy/Makefile drivers/phy/phy-bcm-cygnus-pcie.c+223 -07 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchArun ParameswaranJD (Jiandong) ZhengScott Branden
1/2R-b R-b R-b
2/2R-b R-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v5 thread

Cover letter [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support

This patch series adds support for the Cygnus PCIe PHY

This patch series is based on Linux v4.3-rc1 and is avaliable in:
https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v5

Changes from v4:
- Add comment to explain the required 50 ms wait after PCIe AFE is brought
up
- Change some of 'dev_info' print to 'dev_dbg'

Changes from v3:
- Modify the driver to use child node to represent each PCIe PHY
- Update device tree binding document and examples accordingly
- Add owner filed in phy ops

Changes from v2:
- Dropped MDC/MDIO bus driver since it's not needed to enable/disable the analog-front-end of the PCIe Serdes on Cygnus
- Optimized delay waiting for PCIe analog-front-end to be fully enabled
- Reduce the #phy-cell to 1 since now the MDIO PHY ID is not required

Changes from v1:
- Move the MDC/MDIO bus driver from drivers/phy/* to drivers/bus/*
- Make the PCIe PHY device node child node of the MDIO bus
- Change the PCIe PHY driver to tristate so it can be compiled as a module
- Other minor changes

Ray Jui (2):
dt-bindings: Add Cygnus PCIe PHY binding doc
phy: cygnus: pcie: Add Cygnus PCIe PHY support

 .../bindings/phy/brcm,cygnus-pcie-phy.txt          |  47 +++++
 drivers/phy/Kconfig                                |   9 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-bcm-cygnus-pcie.c                  | 213 +++++++++++++++++++++
 4 files changed, 270 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
 create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c
Signature · 1 line
1.9.1