Skip to content

turbostat, support CPU0 hotplug

Prarit Bhargava linux-pm lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 4 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2turbostat, add base_cputools/power/x86/turbostat/turbostat.c+18 -130 replies
2/2turbostat, add set_base_cpu()tools/power/x86/turbostat/turbostat.c+18 -24 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] turbostat, support CPU0 hotplug

turbostat does not function properly on systems that support CPU0 hotplug. When running turbostat on these systems the following error is seen.

[root@intel-chiefriver-04 ~]# turbostat ls
turbostat: no /dev/cpu/0/msr
Try "# modprobe msr": No such file or directory

This happens because in many places turbostat hardcodes 0, and calls to check_dev_msr(), for example, will fail if CPU0 has been removed.

This patchset adds functionality to determine the lowest found cpu on the system, and to use that value instead of 0. This patchset also moves setup_all_buffers() to the beginning of the turbostat_init() so that set_base_cpu() can take advantage of topo.max_cpu_num which is set in setup_all_buffers().

After this change, on a system that has CPU0 removed,

[root@prarit ~]# ./turbostat -d -d ls
turbostat version 4.5 2 Apr, 2015 - Len Brown <[email protected]> num_cpus 7 max_cpu_num 7
cpu0 NOT PRESENT
cpu 1 pkg 0 core 0
cpu 2 pkg 0 core 1
cpu 3 pkg 0 core 1
cpu 4 pkg 0 core 2
cpu 5 pkg 0 core 2
cpu 6 pkg 0 core 3
cpu 7 pkg 0 core 3
<snip>
anaconda-ks.cfg README turbostat
Core CPU Avg_MHz %Busy Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CP

   -       -     492   14.20    3462    2634       0   18.90    0.00    
   0       1     353    9.95    3552    2645       0    9.68    0.00    
   1       2     217    7.70    2814    2614       0   64.63    0.00    
   1       3    2006   57.20    3507    2660       0   15.61
   2       4     120    3.37    3570    2649       0   10.95    0.00    
   2       5     155    4.22    3679    2631       0    9.48
   3       6     296    8.38    3530    2620       0   11.07    0.00    
   3       7     296    8.15    3630    2617       0   11.22

0.001160 sec

I have additionally tested various other hotplug configurations to make sure that turbostat behaves correctly in those situations as well.

Prarit Bhargava (2):
turbostat, add base_cpu
turbostat, add set_base_cpu()

 tools/power/x86/turbostat/turbostat.c | 49 +++++++++++++++++++++++++----------
 1 file changed, 35 insertions(+), 14 deletions(-)
Signature · 1 line
1.8.3.1