Skip to content

Enable SPI ethernet on MSM8960 CDP

Stephen Boyd linux-arm-kernel linux-arm-msm lkml 1 version Applied

Status from this message: Applied, thanks

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 5 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/5ARM: dts: qcom: Replace gpio node with pinctrl nodearch/arm/boot/dts/qcom-msm8960.dtsi+2 -31 reply
2/5ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodesarch/arm/boot/dts/qcom-msm8960.dtsi+19 -01 reply
3/5ARM: dts: qcom: Add MSM8960 CDP RPM regulatorsarch/arm/boot/dts/qcom-msm8960-cdp.dts+236 -01 reply
4/5ARM: dts: qcom: Add ks8851 node for wired ethernetarch/arm/boot/dts/qcom-msm8960-cdp.dts arch/arm/boot/dts/qcom-msm8960.dtsi+91 -01 reply
5/5ARM: qcom_defconfig: Enable options for KS8851 ethernetarch/arm/configs/qcom_defconfig+3 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/5] Enable SPI ethernet on MSM8960 CDP

These patches enable the ks8851 SPI ethernet adapter found on MSM8960 CDPs.

Stephen Boyd (5):
ARM: dts: qcom: Replace gpio node with pinctrl node
ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes
ARM: dts: qcom: Add MSM8960 CDP RPM regulators
ARM: dts: qcom: Add ks8851 node for wired ethernet
ARM: qcom_defconfig: Enable options for KS8851 ethernet

 arch/arm/boot/dts/qcom-msm8960-cdp.dts | 302 +++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/qcom-msm8960.dtsi    |  49 +++++-
 arch/arm/configs/qcom_defconfig        |   3 +
 3 files changed, 351 insertions(+), 3 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Read the cover letter in its thread