Skip to content

Add support for RapidIO boot

jacquiot.aurelien at gmail.com u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4cmd_mem.c: add a memory wait (mwait) commandcommon/cmd_mem.c+69 -01 reply
2/4rapidio: add support for RapidIO bootcommon/Kconfig common/Makefile common/cmd_rio.c +1 more+649 -11 reply
3/4rapidio: add documentation for RapidIO bootdoc/README.rapidio+158 -01 reply
4/4rapidio: add driver for TI KeyStone RapidIOMakefile configs/k2hk_evm_defconfig drivers/Kconfig +4 more+2042 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/4] Add support for RapidIO boot

From: Aurelien Jacquiot <[email protected]>

RapidIO is a high-performance packet-switched interconnect technology (www.rapidio.org) that can be used for messaging or memory transfers like Ethernet or PCIe.

This feature adds the RapidIO boot functionality for slave mode (i.e. U-Boot does not fetch the images, images are pushed by a peer device/board). A new 'rio' command group allows to initialize and perform basic RapidIO operations. In addition the 'mem' group command has been enhanced in order to wait a given value in memory (to be notified that images have been pushed by peer).

This feature has been firstly designed for TI KeyStone architecture and patches includes the RapidIO controller device driver for KeyStone architecture but it can used by any device/architecture that has hardware RapidIO support with DirectI/O. There just to add the corresponding RapidIO controller device driver.

For more information, read the doc/README.rapidio documentation.

Aurelien Jacquiot (4):
cmd_mem.c: add a memory wait (mwait) command
rapidio: add support for RapidIO boot
rapidio: add documentation for RapidIO boot
rapidio: add driver for TI KeyStone RapidIO

 Makefile                       |    1 +
 common/Kconfig                 |    7 +-
 common/Makefile                |    1 +
 common/cmd_mem.c               |   69 ++
 common/cmd_rio.c               |  260 ++++++++
 configs/k2hk_evm_defconfig     |    2 +
 doc/README.rapidio             |  158 +++++
 drivers/Kconfig                |    2 +
 drivers/rapidio/Kconfig        |    5 +
 drivers/rapidio/Makefile       |    8 +
 drivers/rapidio/keystone_rio.c | 1374 ++++++++++++++++++++++++++++++++++++++++
 drivers/rapidio/keystone_rio.h |  650 +++++++++++++++++++
 include/rio.h                  |  382 +++++++++++
 13 files changed, 2918 insertions(+), 1 deletions(-)
 create mode 100644 common/cmd_rio.c
 create mode 100644 doc/README.rapidio
 create mode 100644 drivers/rapidio/Kconfig
 create mode 100644 drivers/rapidio/Makefile
 create mode 100644 drivers/rapidio/keystone_rio.c
 create mode 100644 drivers/rapidio/keystone_rio.h
 create mode 100644 include/rio.h