Skip to content

Patches to get dm814x-evm booting to NFSroot

Tony Lindgren linux-arm-kernel linux-omap lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest10 patches 18 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/10ARM: OMAP2+: Fix timer entries for dm814xarch/arm/mach-omap2/omap_hwmod_81xx_data.c+4 -40 replies
2/10clk: ti: Add few dm814x clock aliasesdrivers/clk/ti/clk-814x.c+4 -05 replies
3/10ARM: OMAP2+: Add DPPLS clock manager for dm814xarch/arm/mach-omap2/prm_common.c include/linux/clk/ti.h+7 -00 replies
4/10ARM: OMAP2+: Enable GPIO for dm814xarch/arm/mach-omap2/omap_hwmod_81xx_data.c+2 -20 replies
5/10ARM: OMAP2+: Disable GPIO softreset for dm81xxarch/arm/mach-omap2/omap_hwmod_81xx_data.c+3 -04 replies
6/10ARM: OMAP2+: Remove useless check for legacy booting for dm814xarch/arm/mach-omap2/io.c+1 -20 replies
7/10ARM: dts: Fix dm814x entries for pllss and prcmarch/arm/boot/dts/dm814x.dtsi+9 -20 replies
8/10ARM: dts: Fix some mux and divider clocks to get dm814x-evm bootingarch/arm/boot/dts/dm814x-clocks.dtsi+79 -300 replies
9/10ARM: dts: Fix dm8148 control modules rangesarch/arm/boot/dts/dm814x.dtsi+6 -40 replies
10/10ARM: dts: Fix dm814x pinctrl address and maskarch/arm/boot/dts/dm814x.dtsi+2 -27 replies

Reviews trailers per patch

1 of 10 patches has a Reviewed-by or Acked-by.

PatchTero Kristo
1/10
2/10A-b
3/10
4/10
5/10
6/10
7/10
8/10
9/10
10/10

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 00/10] Patches to get dm814x-evm booting to NFSroot

Hi all,

Here are some fixes for v4.5 merge window to get dm814x-evm booting. While hp t410 boots based on the bootloader clocks, dm814x-evm needs more things configured. Especially the clock dts entries were all wrong and just happened to be harmless on hp t410.

To boot, you probably want to use v4.4-rc3 because of commit 29f5b34ca1a1 ("arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data") and also manually apply commit 0db19b850468 ("net: cpsw: Fix ethernet regression for dm814x") from Linux next.

I have more changes coming up after this series after I clean them up a bit. Here's a brief status update for people:

What's working after this series on dm814x-evm and hp t410:

- Timers

- Serial

- Ethernet

- DMA

- I2C (only tested so far with i2cdetect -r 0)

- GPIO (only tested with additional MMC patches for card detect)

I have the following additional patches coming soonish:

- Basic ADPLL clock driver

- MMC support

- USB support

- Minimal j5eco-evm support

Should work with just configuration:

- [PATCH 0/3] pwm: omap: Add PWM support using dual-mode timers

I'm not working on any of the accelerators or graphics FYI. If somebody has patches coming for those please notify on the linux-omap and linux-arm-kernel mailings lists so we can avoid duplicate work.

Cheers,

Tony

Tony Lindgren (10):
ARM: OMAP2+: Fix timer entries for dm814x
clk: ti: Add few dm814x clock aliases
ARM: OMAP2+: Add DPPLS clock manager for dm814x
ARM: OMAP2+: Enable GPIO for dm814x
ARM: OMAP2+: Disable GPIO softreset for dm81xx
ARM: OMAP2+: Remove useless check for legacy booting for dm814x
ARM: dts: Fix dm814x entries for pllss and prcm
ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
ARM: dts: Fix dm8148 control modules ranges
ARM: dts: Fix dm814x pinctrl address and mask

 arch/arm/boot/dts/dm814x-clocks.dtsi       | 109 +++++++++++++++++++++--------
 arch/arm/boot/dts/dm814x.dtsi              |  25 ++++---
 arch/arm/mach-omap2/io.c                   |   3 +-
 arch/arm/mach-omap2/omap_hwmod_81xx_data.c |  15 ++--
 arch/arm/mach-omap2/prm_common.c           |   6 ++
 drivers/clk/ti/clk-814x.c                  |   4 ++
 include/linux/clk/ti.h                     |   1 +
 7 files changed, 117 insertions(+), 46 deletions(-)
Signature · 1 line
2.6.2