Skip to content

RFC ACPI PCI support for arm64

Jayachandran C linux-arm-kernel linux-pci 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3arm64: pci: Add ACPI supportarch/arm64/kernel/pci.c+45 -20 replies
2/3pci: Handle NULL parent in pci_bus_assign_domain_nrdrivers/pci/pci.c+6 -10 replies
3/3pci/host : Add a generic ACPI based host controllerdrivers/pci/host/Kconfig drivers/pci/host/Makefile drivers/pci/host/pci-host-acpi.c+219 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC PATCH 0/3] ACPI PCI support for arm64

This is a very simple and generic implementation of a PCI host controller based on ACPI. This approach does not pull in the MMCONFIG and ECAM code from x86.

It is important for us to have a working ACPI based PCI host controller implementation for arm64, so I thought I would post this as a simple and less disruptive alternative.

This is tested with arm64 QEMU and OVMF. Comments are very welcome.

Thanks,
JC.

Jayachandran C (3):
arm64: pci: Add ACPI support
pci: Handle NULL parent in pci_bus_assign_domain_nr pci/host : Add a generic ACPI based host controller

 arch/arm64/kernel/pci.c          |  47 ++++++++-
 drivers/pci/host/Kconfig         |   7 ++
 drivers/pci/host/Makefile        |   1 +
 drivers/pci/host/pci-host-acpi.c | 211 +++++++++++++++++++++++++++++++++++++++
 drivers/pci/pci.c                |   7 +-
 5 files changed, 270 insertions(+), 3 deletions(-)
 create mode 100644 drivers/pci/host/pci-host-acpi.c
Signature · 1 line
1.9.1