Support for LEGO MINDSTORMS EV3
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v4 Latest4 patches 4 repliesIn review
- v25 patches 11 repliesSuperseded
- v15 patches 19 repliesApplied
Changes in v4 from the cover letter
* New patches for device tree bindings specifications
* Fixed vendor on eeprom device node
Patches in v4 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/4 | dt-bindings: Add vendor prefix for LEGODocumentation/ | +1 | 1 reply | |
| 2/4 | dt-bindings: Add LEGO MINDSTORMS EV3 compatible specificationDocumentation/ | +4 | 1 reply | |
| 3/4 | dt-bindings: add "microchip,24c128" compatible stringDocumentation/ | +2 | 1 reply | |
| 4/4 | ARM: dts: Add LEGO MINDSTORMS EV3 dtsarch/ arch/ | +315 | 0 replies |
Reviews trailers per patch
3 of 4 patches have a Reviewed-by or Acked-by.
| Patch | Rob Herring |
|---|---|
| 1/4 | A-b |
| 2/4 | A-b |
| 3/4 | A-b |
| 4/4 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v4 0/4] Support for LEGO MINDSTORMS EV3
This patch series adds support for LEGO MINDSTORMS EV3. This is a TI AM1808 based board.
v4 changes:
* New patches for device tree bindings specifications
* Fixed vendor on eeprom device node
v3 changes:
* required defconfig patches have been picked up in linux-davinci tree, so this is the only patch left in the series
* Added aliases node for consistent naming of serial ports
* Added memory node
* Removed nodes that are not finalized yet
* Renamed button labels to match EV3 users manual
v2 changes:
* Dropped defconfig patches that have already been pick up
* Added some new defconfig patches
* Updated device tree file based on feedback and new available bindings
* Renamed file to include da850- prefix
* Changed button labels
* Fixed LED names
* Added beeper device for sound
* Added regulators for USB and A/DC
* Removed unused pinmux nodes
* Added pinconf for buttons
* Enabled pwms
* Used preferred bindings for flash partitions
* Added A/DC spi device
* Enabled USB
David Lechner (4):
dt-bindings: Add vendor prefix for LEGO
dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification
dt-bindings: add "microchip,24c128" compatible string
ARM: dts: Add LEGO MINDSTORMS EV3 dts
Documentation/devicetree/bindings/arm/davinci.txt | 4 + .../devicetree/bindings/eeprom/eeprom.txt | 2 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/da850-lego-ev3.dts | 313 +++++++++++++++++++++ 5 files changed, 322 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/da850-lego-ev3.dts
Signature · 1 line
2.7.4