Skip to content

ASoC: hdmi: Preparatory work to support MST audio

[email protected] alsa-devel 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest5 patches 1 replyIn review
  2. v312 patches 5 repliesSuperseded
  3. v213 patches 4 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v130 patches24 repliesSuperseded

Changes in v4 from the cover letter

o rebased on latest branch
o Removed already merged patch.

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5ASoC: hdac_hdmi: Begin to add support for DP Multi-stream audiosound/soc/codecs/hdac_hdmi.c+240 -1531 reply
2/5ASoC: Intel: Skylake: Add route change to nau88l25_max98357a machinesound/soc/intel/boards/skl_nau88l25_max98357a.c+4 -40 replies
3/5ASoC: Intel: Skylake: Add route change to nau88l25_ssm4567 machinesound/soc/intel/boards/skl_nau88l25_ssm4567.c+5 -40 replies
4/5ASoC: Intel: bxt: Add route change to rt298 machinesound/soc/intel/boards/bxt_rt298.c+3 -30 replies
5/5ASoC: hdac_hdmi: Add support to handle MST capable pinsound/soc/codecs/hdac_hdmi.c+24 -30 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [PATCH v4 0/5] ASoC: hdmi: Preparatory work to support MST audio

From: Jeeja KP <[email protected]>

Display port 1.2 introduces new capability Multi-stream transport (MST) which will allow multiple stream to route to single display port where multiple monitors are connected. Multiple monitors will be connected by a MST Hub or a monitor capable of daisy-chaining.

With MST support, a pin can support multiple ports and on each port a monitor can be connected.

This is preparatory patch series to enable DP MST Audio by extending the current design from pin to port.
o i915 acomp APIs are now used to read the ELD info and support is extended for MST port as well.

o Configure port/pin/audio infoframe in widget event handlers for dynamic routing when monitor is connected/disconnected instead of DAI ops.

o Use set_tdm slot to set the stream tag instead of dai params and store it in pcm context and use this in configuring the converter in widget event handler.

o With MST, pin mux for CVT selection will be used to select CVT for pin-port instead of pin. So create the pin mux accordingly and update the route in skl/bxt machines.

o add channel map support in bxtn machines.

Note:
o This changes require UCM conf modification, once this series is accepted, I will post the UCM change.

o This series depends on DRM changes to enable MST and changes are already merged in 4.10-rc1 branch.

Changes v2:
Split the patchs to smaller series.

Changes v3:
o rebased on latest branch
o Removed already merged patch.

Changes v4:
o rebased on latest branch
o Removed already merged patch.

Jeeja KP (5):
ASoC: hdac_hdmi: Begin to add support for DP Multi-stream audio
ASoC: Intel: Skylake: Add route change to nau88l25_max98357a machine
ASoC: Intel: Skylake: Add route change to nau88l25_ssm4567 machine
ASoC: Intel: bxt: Add route change to rt298 machine
ASoC: hdac_hdmi: Add support to handle MST capable pin

 sound/soc/codecs/hdac_hdmi.c                    | 416 +++++++++++++++---------
 sound/soc/intel/boards/bxt_rt298.c              |   6 +-
 sound/soc/intel/boards/skl_nau88l25_max98357a.c |   8 +-
 sound/soc/intel/boards/skl_nau88l25_ssm4567.c   |   9 +-
 4 files changed, 274 insertions(+), 165 deletions(-)
Signature · 1 line
2.5.0