Skip to content

ARM: dts: da850-evm: vpif DT changes

Bartosz Golaszewski linux-arm-kernel linux-devicetree lkml 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest4 patches 2 repliesIn review
  2. v24 patches 0 repliesSuperseded
  3. v14 patches 9 repliesSuperseded

Changes in v3 from the cover letter

- removed the enable-gpios property - it may take some more time to determine the correct solution for enable-gpios, so I decided to respin the series without it and send it later as a follow-up

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4ARM: dts: da850-evm: fix whitespace errorsarch/arm/boot/dts/da850-evm.dts+5 -50 replies
2/4ARM: dts: da850: add vpif video display pinsarch/arm/boot/dts/da850.dtsi+15 -20 replies
3/4ARM: dts: da850-evm: add the UI expander nodearch/arm/boot/dts/da850-evm.dts+5 -11 reply
4/4ARM: dts: da850-evm: add the output port to the vpif nodearch/arm/boot/dts/da850-evm.dts arch/arm/boot/dts/da850.dtsi+18 -50 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/4] ARM: dts: da850-evm: vpif DT changes

This series adds necessary changes to make vpif work on the da850-evm board.

The first patch only contains whitespace error fixes.

The second patch add a pinctrl node for vpif display pins.

The third adds the UI expander node that is needed to select the video capture functionality.

The last patch extends the vpif node with an output port.

v1 -> v2:
- used enable-gpios property instead of gpio hogs
- renamed the UI expander
- corrected the commit message in patch 2/4

v2 -> v3:
- removed the enable-gpios property - it may take some more time to determine the correct solution for enable-gpios, so I decided to respin the series without it and send it later as a follow-up

Bartosz Golaszewski (4):
ARM: dts: da850-evm: fix whitespace errors
ARM: dts: da850: add vpif video display pins
ARM: dts: da850-evm: add the UI expander node
ARM: dts: da850-evm: add the output port to the vpif node

 arch/arm/boot/dts/da850-evm.dts | 31 +++++++++++++++++++++----------
 arch/arm/boot/dts/da850.dtsi    | 25 ++++++++++++++++++++++---
 2 files changed, 43 insertions(+), 13 deletions(-)
Signature · 1 line
2.9.3