Skip to content

ARM: davinci: vpif capture & display support

Bartosz Golaszewski linux-arm-kernel lkml 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest6 patches 3 repliesIn review
  2. v36 patches 4 repliesSuperseded
  3. v25 patches 1 replySuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v14 patches4 repliesSuperseded

Changes in v4 from the cover letter

- removed patch 6/6 - it may take some more time to determine the correct solution for enable-gpios, so I decided to respin the series without it and send it later as a follow-up
- split the pdata-quirks patch for vpif capture into two separate
patches: one adding the OF_DEV_AUXDATA() and one adding the actual quirks
- split the vpif capture registration into two functions to avoid redundant ifs

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6ARM: davinci: da8xx: allow having multiple pdata-quirksarch/arm/mach-davinci/pdata-quirks.c+0 -11 reply
2/6ARM: davinci: board-da850-evm: add I2C ID for VPIFarch/arm/mach-davinci/board-da850-evm.c+1 -00 replies
3/6ARM: davinci: da8xx: add OF_DEV_AUXDATA() for vpifarch/arm/mach-davinci/da8xx-dt.c+1 -00 replies
4/6ARM: davinci: da8xx: add pdata-quirks for VPIF capturearch/arm/mach-davinci/pdata-quirks.c+111 -00 replies
5/6ARM: da850-evm: add a fixed regulator for the UI board IO expanderarch/arm/mach-davinci/board-da850-evm.c+3 -00 replies
6/6ARM: davinci: add pdata-quirks for da850-evm vpif displayarch/arm/mach-davinci/pdata-quirks.c+66 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [PATCH v4 0/6] ARM: davinci: vpif capture & display support

This series adds pdata quirks and other changes required to make vpif work on the da850-evm board.

v1 -> v2:
- added patch 1/5 - don't bail-out from pdata_quirks_check() after applying a single quirk
- changed the comment above the new fixed regulator to make it more descriptive
- removed unnecessary #ifdefs from pdata-quirks.c

v2 -> v3:
- added patch 6/6: add enable GPIOs to pdata-quirks - this is needed because vpif gets its resources from pdata-quirks instead of the device tree

v3 -> v4:
- removed patch 6/6 - it may take some more time to determine the correct solution for enable-gpios, so I decided to respin the series without it and send it later as a follow-up
- split the pdata-quirks patch for vpif capture into two separate
patches: one adding the OF_DEV_AUXDATA() and one adding the actual quirks
- split the vpif capture registration into two functions to avoid redundant ifs

Bartosz Golaszewski (3):
ARM: davinci: da8xx: allow having multiple pdata-quirks
ARM: da850-evm: add a fixed regulator for the UI board IO expander
ARM: davinci: add pdata-quirks for da850-evm vpif display

Kevin Hilman (3):
ARM: davinci: board-da850-evm: add I2C ID for VPIF
ARM: davinci: da8xx: add OF_DEV_AUXDATA() for vpif
ARM: davinci: da8xx: add pdata-quirks for VPIF capture

 arch/arm/mach-davinci/board-da850-evm.c |   4 +
 arch/arm/mach-davinci/da8xx-dt.c        |   1 +
 arch/arm/mach-davinci/pdata-quirks.c    | 178 +++++++++++++++++++++++++++++++-
 3 files changed, 182 insertions(+), 1 deletion(-)
Signature · 1 line
2.9.3