ARM: lpc32xx: migrate CLCD config to device tree
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/2] [kernel] ARM: lpc32xx: migrate CLCD config to device tree
Hi Vladimir,
Quoted 14 lines · Sylvain Lemieux
From: Sylvain Lemieux <[email protected]>
Migrate the CLCD configurations to the device tree and remove custom functions from board files.
This change depends on the following change:
"video: ARM CLCD: fix dma allocation size"
https://www.spinics.net/lists/arm-kernel/msg567178.htmlNote:
* We tested a similar change on a custom LPC32xx board with a 480x272 LCD.
* We did not test this change on hardware;
we do not have access to a PHY3250 board with the 240x320 LCD.
Quoted 8 lines
Liam Beguin (2):
ARM: dts: lpc32xx: phy3250: add clcd configuration
ARM: lpc32xx: drop CLCD configurationarch/arm/boot/dts/lpc3250-phy3250.dts | 35 ++++++++++++++++++ arch/arm/mach-lpc32xx/phy3250.c | 70 ----------------------------------- 2 files changed, 35 insertions(+), 70 deletions(-)
do you think you can look at this patchset?
Regards,
Sylvain