Ethernet PHY interrupt improvements
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest2 patches 0 repliesNew
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | ARM64: dts: meson: add comments with the GPIO for the PHY interrupts | +0 | 0 replies | |
| 2/2 | ARM64: dts: meson-gxm: add the PHY interrupt line on Khadas VIM2 | +0 | 0 replies |
Reviews trailers per patch
All 2 patches have a Reviewed-by or Acked-by.
| Patch | Jerome Brunet |
|---|---|
| 1/2 | R-b |
| 2/2 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/2] Ethernet PHY interrupt improvements
Quoted 6 lines · Martin Blumenstingl
this small series consists of two patches:
#1 documents the GPIO to which the PHY's interrupt line is connected
(the name "MAC_INTR" is used in the schematics of Odroid-C2 and
Khadas VIM2)
#2 adds the RTL8211F PHY's interrupt line on Khadas VIM2
Quoted 6 lines
I was a bit surprised to see that the GXM Q200 board seems to use
GPIOH_3instead ofGPIOZ_15like all other boards. @Jerome: could you please check ifGPIOH_3is correct or if it's a "copy-and-paste" issue (Q200 is the only GXL/GXM based board. GXL/GXM SoCs have fewer GPIOAO pins than GXBB, so the interrupt offset for the same non-GPIOAO pin is different than on GXBB)
Good catch, I confirm that the interrupt in GPIOZ_15 and certainly not GPIOH_3
Quoted 18 lines
compile-tested: all boards
runtime tested: Khadas VIM2 (unplugging / plugging the Ethernet cable increases the interrupt counter in/proc/interruptsand the kernel correctly reports that the cable has been {un,}plugged)Martin Blumenstingl (2):
ARM64: dts: meson: add comments with the GPIO for the PHY interrupts
ARM64: dts: meson-gxm: add the PHY interrupt line on Khadas VIM2arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 1 + arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 ++ arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 1 + arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 3 +++ arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 1 + 5 files changed, 8 insertions(+)