Skip to content

regulator da9062: add and make use of map_mode support

Christoph Fritz linux-arm-kernel linux-devicetree 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3regulator: da9062: add of_map_mode support for bucksdrivers/regulator/da9062-regulator.c+20 -01 reply
2/3dt-bindings: regulator: describe da9062's regulator modesDocumentation/devicetree/bindings/mfd/da9062.txt+8 -01 reply
3/3ARM: dts: phycore-imx6: set buck regulator modes explicitlyarch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi+4 -02 replies

Reviews trailers per patch

2 of 3 patches have a Reviewed-by or Acked-by.

PatchFabio Estevam
1/3R-b
2/3
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] regulator da9062: add and make use of map_mode support

This patchset adds of_map_mode support to regulator da9062, documents its bindings and makes use of it in dts phycore-imx6.

Christoph Fritz (3):
regulator: da9062: add of_map_mode support for bucks
dt-bindings: regulator: describe da9062's regulator modes
ARM: dts: phycore-imx6: set buck regulator modes explicitly

 Documentation/devicetree/bindings/mfd/da9062.txt  |  8 ++++++++
 arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi |  4 ++++
 drivers/regulator/da9062-regulator.c              | 20 ++++++++++++++++++++
 3 files changed, 32 insertions(+)
Signature · 1 line
2.1.4