Skip to content

Renesas Stout board support (R-Car Gen2)

Oleksandr Tyshchenko xen-devel 5 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest4 patches 8 repliesIn review
  2. v45 patches 8 repliesSuperseded
  3. v35 patches 10 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v23 patches18 repliesSuperseded
v14 patches23 repliesSuperseded

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4xen/arm: drivers: scif: Extend driver to handle other interfacesxen/drivers/char/scif-uart.c xen/include/asm-arm/scif-uart.h+80 -380 replies
2/4xen/arm: drivers: scif: Add support for SCIFA compatible UARTsxen/drivers/char/scif-uart.c xen/include/asm-arm/scif-uart.h+54 -30 replies
3/4xen/arm: Extend SCIF early prink code to handle other interfacesdocs/misc/arm/early-printk.txt xen/arch/arm/Rules.mk xen/arch/arm/arm32/debug-scif.inc+23 -62 replies
4/4xen/arm: Add early printk support for SCIFA compatible UARTsxen/arch/arm/arm32/debug-scif.inc+4 -11 reply

Reviews trailers per patch

3 of 4 patches have a Reviewed-by or Acked-by.

PatchJulien Grall
1/4A-b
2/4A-b
3/4
4/4A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH V5 0/4] Renesas Stout board support (R-Car Gen2)

From: Oleksandr Tyshchenko <[email protected]>

Hi, all.

The purpose of this patch series is to add required support to be able to run Xen on Renesas Stout board [1] which uses SCIFA compatible UART as a console interface.

Actually Xen already has support for SCIF compatible UARTs which are used on Renesas Lager (R-Car Gen2), Salvator-X, H3ULCB/M3ULCB (R-Car Gen3) and other development boards. So this patch series extends existing support to be able to handle both interfaces.

----------

Current patch series is based on the following commit 1c6504163595d45e47a01750318c2b7b50541cbe and tested on Stout (ARM32) and H3ULCB (ARM64) boards.

You can find current patch series here:
repo: https://github.com/otyshchenko1/xen.git branch: stout_upstream3

You can find previous discussions here:
[V1] https://www.mail-archive.com/[email protected]/msg21058.html
[V2] https://www.mail-archive.com/[email protected]/msg37518.html
[V3] https://www.mail-archive.com/[email protected]/msg42493.html
[V4] https://www.mail-archive.com/[email protected]/msg43332.html

----------

In order to run Xen on Stout board you need "PSCI-enabled" U-Boot (not upsteamed yet). You can find corresponding patches for U-Boot here:
http://u-boot.10912.n7.nabble.com/PATCH-0-3-PSCI-support-for-r8a7790-SoC-Lager-Stout-boards-td357352.html

Have a plan to update Xen Wiki regarding this board.

----------

Please note, that first two patches already have Julien's A-b,
and the following patch "[PATCH V4 1/5] xen/arm: Clarify usage of earlyprintk for Lager board" was removed from this series (as handled separately).

[1] https://elinux.org/R-Car/Boards/Stout

Oleksandr Tyshchenko (4):
xen/arm: drivers: scif: Extend driver to handle other interfaces xen/arm: drivers: scif: Add support for SCIFA compatible UARTs xen/arm: Extend SCIF early prink code to handle other interfaces xen/arm: Add early printk support for SCIFA compatible UARTs

 docs/misc/arm/early-printk.txt    |   5 ++
 xen/arch/arm/Rules.mk             |   7 ++
 xen/arch/arm/arm32/debug-scif.inc |  22 +++++--
 xen/drivers/char/scif-uart.c      | 131 ++++++++++++++++++++++++++++----------
 xen/include/asm-arm/scif-uart.h   |  44 +++++++++++--
 5 files changed, 161 insertions(+), 48 deletions(-)
Signature · 7 lines
2.7.4


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel