Skip to content

support ftm responder configuration/statistics

Pradeep Kumar Chitrapu ath10k linux-wireless 9 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest3 patches 2 repliesIn review
  2. v4 posting 2/23 patches 2 repliesSuperseded
  3. v4 posting 1/23 patches 0 repliesSuperseded
Earlier versions · 6
VersionPostedPatchesRepliesStatus
v3 posting 4/43 patches0 repliesSuperseded
v3 posting 3/43 patches0 repliesSuperseded
v3 posting 2/43 patches2 repliesSuperseded
v3 posting 1/43 patches4 repliesSuperseded
v23 patches4 repliesSuperseded
v10 of 3 patches0 repliesSuperseded

Changes in v5 from the cover letter

- changed NL80211_ATTR_FTM_RESPONDER to nested attribute
- renamed 'civic' parameter to 'civicloc'.

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3cfg80211: support FTM responder configuration/statisticsinclude/net/cfg80211.h include/uapi/linux/nl80211.h net/wireless/nl80211.c +2 more+344 -51 reply
2/3mac80211: support FTM responder configuration/statisticsinclude/net/mac80211.h net/mac80211/cfg.c net/mac80211/driver-ops.h +2 more+139 -01 reply
3/3ath10k: Add support to configure ftm responder roledrivers/net/wireless/ath/ath10k/core.h drivers/net/wireless/ath/ath10k/mac.c drivers/net/wireless/ath/ath10k/wmi.c +1 more+43 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v5 yet.

Read the v5 thread

Cover letter [PATCH v5 0/3] support ftm responder configuration/statistics

Currently ftm_responder parameter in hostapd.conf is only used for fine timing measurement (FTM) capability advertisement and actual control of the functionality is with low-level device/driver. This leads to confusion to the user when the capability advertisement is different from actual FTM responder functionality.

For example, FTM responder capability advertisement is set to 'enabled', but the functionality is disabled or not supported by the driver.

The patch set allows userspace to enable FTM responder functionality with the addition of new Netlink flag attribute NL80211_ATTR_FTM_RESPONDER with configurable lci/civic ocation parameters. Also extended feature flag is added for the drivers to advertise the support. Setting the flag to enable FTM responder would imply that AP responds to all FTM requests. Default is considered to be disabled.

changes in V5:
- changed NL80211_ATTR_FTM_RESPONDER to nested attribute
- renamed 'civic' parameter to 'civicloc'.

changes in V4:
- no changes. Rebased and resending as v4 as v3 patches were dropped for unknown reason

changes in V3:
- fixed the ambiguous ftm responder disable case to be not supported

changes in V2:
- updated version number
- rebased patches

Johannes Berg, Pradeep Kumar Chitrapu (1):
cfg80211: support FTM responder configuration/statistics

David Spinadel, Johannes Berg, Pradeep Kumar Chitrapu (1):
mac80211: support FTM responder configuration/statistics

Pradeep Kumar Chitrapu (1):
ath10k: Add support to configure ftm responder role

 drivers/net/wireless/ath/ath10k/core.h |   1 +
 drivers/net/wireless/ath/ath10k/mac.c  |  28 +++++++
 drivers/net/wireless/ath/ath10k/wmi.c  |   4 +
 drivers/net/wireless/ath/ath10k/wmi.h  |  10 +++
 include/net/cfg80211.h                 |  66 ++++++++++++++++
 include/net/mac80211.h                 |  13 ++++
 include/uapi/linux/nl80211.h           |  90 ++++++++++++++++++++++
 net/mac80211/cfg.c                     |  84 +++++++++++++++++++++
 net/mac80211/driver-ops.h              |  16 ++++
 net/mac80211/trace.h                   |  23 ++++++
 net/mac80211/util.c                    |   3 +
 net/wireless/nl80211.c                 | 134 +++++++++++++++++++++++++++++++--
 net/wireless/rdev-ops.h                |  15 ++++
 net/wireless/trace.h                   |  44 +++++++++++
 14 files changed, 526 insertions(+), 5 deletions(-)
Signature · 7 lines
1.9.1


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k