Skip to content

Add interconnect support for GENI QUPs

Alok Chauhan linux-arm-msm linux-devicetree linux-i2c linux-serial linux-spi lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 4 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6dt-bindings: soc: qcom: Add interconnect binding for GENI QUPDocumentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt+10 -01 reply
2/6soc: qcom: Add wrapper to support for Interconnect pathdrivers/soc/qcom/qcom-geni-se.c include/linux/qcom-geni-se.h+140 -00 replies
3/6i2c: i2c-qcom-geni: Add interconnect supportdrivers/i2c/busses/i2c-qcom-geni.c+13 -01 reply
4/6spi: spi-geni-qcom: Add interconnect supportdrivers/spi/spi-geni-qcom.c+19 -12 replies
5/6tty: serial: qcom_geni_serial: Add interconnect supportdrivers/tty/serial/qcom_geni_serial.c+26 -10 replies
6/6arm64: dts: sdm845: Add interconnect for GENI QUParch/arm64/boot/dts/qcom/sdm845.dtsi+14 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/6] Add interconnect support for GENI QUPs

This patch series contains following:
* Add wrapper framework to support interconnect path from GENI QUPs. This wrapper enabled and help individual SEs to put their BW request. Adding this wrapper make sense because we don't want individual SEs to request to interconnect driver separately and put individual bw votes from QUP.

This wrapper framework does the following:
- Request for interconnect path handle
- Maintain record of individual SEs' avg/peak bw.
- Aggregated avg/peak bw based on how many SE's are active and put single bw request from QUP

* Interconnect wrapper API calling from I2C, SPI & Uart driver
* dt binding in sdm845 soc for Interconnect path for GENI QUPs
* dt binding documentation

Alok Chauhan (6):
dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
soc: qcom: Add wrapper to support for Interconnect path
i2c: i2c-qcom-geni: Add interconnect support
spi: spi-geni-qcom: Add interconnect support
tty: serial: qcom_geni_serial: Add interconnect support
arm64: dts: sdm845: Add interconnect for GENI QUP

 .../devicetree/bindings/soc/qcom/qcom,geni-se.txt  |  10 ++
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |  14 +++
 drivers/i2c/busses/i2c-qcom-geni.c                 |  13 +++
 drivers/soc/qcom/qcom-geni-se.c                    | 129 +++++++++++++++++++++
 drivers/spi/spi-geni-qcom.c                        |  20 +++-
 drivers/tty/serial/qcom_geni_serial.c              |  27 ++++-
 include/linux/qcom-geni-se.h                       |  11 ++
 7 files changed, 222 insertions(+), 2 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project