System Firmware Loader for TI K3 family SoCs
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 13 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 13 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs
Quoted 3 lines · Simon Goldschmidt
Quoted 1 line · Andreas Dannenberg
[...]
Quoted 8 lines
Quoted 8 lines
While I also have a working solution based on the existing FS loader
framework this has its own challenges, namely by its very nature only
addressing a subset of our use cases (no eMMC/SD RAW boot support for
example),
IMO, it's actually not that hard to enhance RAW support, i think minimal changes are required. I have attached the patches about an example of loading RAW from QSPI that i have done locally last few week ago.
Quoted 2 lines
Quoted 2 lines
being heavier on resource usage (needing to use ENV to pass parameters),
ENV is optional, you can use DTS. For example loading FPGA bitstream from QSPI RAW:
/* DTS */
/ {
+ aliases {
+ spi0 = &qspi;
+ };
+
+ fs_loader0: fs-loader {
+ u-boot,dm-pre-reloc;
+ compatible = "u-boot,fs-loader";
+ sfconfig = <0 0 100000000 3>;
+ };
+};
+
+&fpga_mgr {
+ u-boot,dm-pre-reloc;
+ firmware-loader = <&fs_loader0>;
+ altr,bitstream = "300000";
+};
Quoted 1 line
Quoted 1 line
and not addressing the need to probe the boot peripheral.
You can add more different probing method in function called "fs_loader_probe". Current fs_loader supports block(sdmmc, emmc, etc...) probing, and with the patches attached support QSPI probing.
Another idea come to mind, we can use fs_loader for loading FIT boot image into RAM, and boot from RAM with existing SPL loader framework, but i'm not sure this implementation fit to your use case?
Quoted 5 lines
Quoted 5 lines
This particular framework works well for use cases requiring to load
firmware from FS-based media once DDR is up and U-Boot is in a more "initialized" state but it is not a one-fits all solution for very early use in SPLboard_init_f()accross different boot modes.
Quoted 7 lines
And would it be an option to improve the loader (maybe dropping the "fs"
from its name)? I think it's an "fs" loader because its idea has been
copied from Linux. I think in U-Boot, it's more common to have things at
a raw offset instead of a file system. Just thinking...
Current fs_loader only support filesystem, and i agree that it made sense to remove the "fs" once it supports the RAW offset as well.
Thanks.
Regards,
TF
Quoted 5 lines
And the current state of that
fs_loaderis like it is because it fits
its single user (socfpga stratix 10), I think.
Quoted 52 lines
Anyway, even if you do need yet another loader, would it make sense to
create a common file instead of adding this in yourarch/mach?Regards,
SimonQuoted 45 lines
Andreas Dannenberg (10):
mmc:k3_arasan: Allow driver to probe without PDs specified
spl: Allow skipping clearing BSS during relocation
spl: Make image loader infrastructure more universal
arm: K3: Introduce System Firmware loader framework
armV7R: K3: am654: Allow using SPL BSS pre-relocation
armv7R: K3: am654: Use full malloc implementation in SPL
armV7R: K3: am654: Load SYSFW binary and config from boot media
configs:am65x_evm_r5: All sysfw to be loaded via MMC
configs:am65x_hs_evm_r5: All sysfw to be loaded via MMC
configs:am65x_hs_evm: Add Support for eMMC bootFaiz Abbas (2):
configs:am65x_evm: Add Support for eMMC boot
am65x: README: Add eMMC layout and flash instructionsLokesh Vutla (1):
armv7R: dts: k3: am654: Update mmc nodes for loading sysfwarch/arm/dts/k3-am654-r5-base-board.dts | 18 ++ arch/arm/lib/crt0.S | 3 + arch/arm/mach-k3/Kconfig | 40 +++ arch/arm/mach-k3/Makefile | 1 + arch/arm/mach-k3/am6_init.c | 34 ++-
arch/arm/mach-k3/include/mach/sysfw-loader.h| 12 + arch/arm/mach-k3/sysfw-loader.c | 263
+++++++++++++++++++
board/ti/am65x/Kconfig | 1 + board/ti/am65x/README | 52 ++++ common/spl/Kconfig | 13 + common/spl/spl_fit.c | 14 + common/spl/spl_mmc.c | 76 ++++-- configs/am65x_evm_a53_defconfig | 2 + configs/am65x_evm_r5_defconfig | 7 +- configs/am65x_hs_evm_a53_defconfig | 2 + configs/am65x_hs_evm_r5_defconfig | 7 +- drivers/mmc/k3_arsan_sdhci.c | 16 +- include/configs/am65x_evm.h | 30 ++- include/spl.h | 26 ++19 files changed, 577 insertions(+), 40 deletions(-)create mode 100644
arch/arm/mach-k3/include/mach/sysfw-loader.hcreate mode 100644arch/arm/mach-k3/sysfw-loader.c
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-misc-fs_loader-Add-QSPI-RAW-partition-loading-suppor.patch
Type: text/x-patch
Size: 6758 bytes
Desc: 0001-misc-fs_loader-Add-QSPI-RAW-partition-loading-suppor.patch
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190508/9d780f88/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0004-ARM-dts-socfpga-Add-dts-support-for-QSPI-Arria-10-So.patch
Type: text/x-patch
Size: 19097 bytes
Desc: 0004-ARM-dts-socfpga-Add-dts-support-for-QSPI-Arria-10-So.patch
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190508/9d780f88/attachment-0001.bin>