Skip to content

regulator da9062: support setting buck modes

Christoph Fritz linux-arm-kernel linux-devicetree lkml 2 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest4 patches 11 repliesIn review
  2. v14 patches 6 repliesSuperseded

Changes in v2 from the cover letter

- rename defines (and header filename) from 906X to 9063
- explain usage of name da9063 in changelog
- rename da906x_map_buck_mode() to da9062_map_buck_mode()
- rebase patchset on top of next-20191113
- adapt subject line of dt-bindings patch to reflect changes in mfd sub-system

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4regulator: da9062: refactor buck modes into headerdrivers/regulator/da9062-regulator.c include/dt-bindings/regulator/dlg,da9063-regulator.h+26 -182 replies
2/4regulator: da9062: add of_map_mode support for bucksdrivers/regulator/da9062-regulator.c+21 -02 replies
3/4dt-bindings: mfd: da9062: describe buck modesDocumentation/devicetree/bindings/mfd/da9062.txt+4 -02 replies
4/4ARM: dts: phycore-imx6: set buck regulator modes explicitlyarch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi+5 -05 replies

Reviews trailers per patch

All 4 patches have a Reviewed-by or Acked-by.

PatchAdam Thomson
1/4R-b
2/4R-b
3/4R-b
4/4R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/4] regulator da9062: support setting buck modes

This patchset adds of_map_mode support to regulator da9062, documents its bindings and makes use of it in dts phycore-imx6 so that buck modes get configured explicitly for this hardware.

Changes in v2:
- rename defines (and header filename) from 906X to 9063
- explain usage of name da9063 in changelog
- rename da906x_map_buck_mode() to da9062_map_buck_mode()
- rebase patchset on top of next-20191113
- adapt subject line of dt-bindings patch to reflect changes in mfd sub-system

Christoph Fritz (4):
regulator: da9062: refactor buck modes into header
regulator: da9062: add of_map_mode support for bucks
dt-bindings: mfd: da9062: describe buck modes
ARM: dts: phycore-imx6: set buck regulator modes explicitly

 Documentation/devicetree/bindings/mfd/da9062.txt   |  4 ++
 arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi  |  5 +++
 drivers/regulator/da9062-regulator.c               | 49 ++++++++++++++--------
 .../dt-bindings/regulator/dlg,da9063-regulator.h   | 16 +++++++
 4 files changed, 56 insertions(+), 18 deletions(-)
 create mode 100644 include/dt-bindings/regulator/dlg,da9063-regulator.h
Signature · 1 line
2.1.4