Skip to content

Refactor the architecture parts of mt7628

Weijie Gao u-boot 8 versions – New

Get series with b4
b4 am 1581583348.26858.79.camel@mcddlt001

Versions newest first · linked by author and title

  1. v5 Latest posting 2/20 of 20 patches 0 repliesNew
  2. v5 posting 1/220 patches 0 repliesSuperseded
  3. v420 patches 0 repliesSuperseded
Earlier versions · 5
VersionPostedPatchesRepliesStatus
v320 patches0 repliesSuperseded
v2 posting 3/30 of 21 patches0 repliesSuperseded
v2 posting 2/30 of 21 patches0 repliesSuperseded
v2 posting 1/321 patches0 repliesSuperseded
v10 of 16 patches0 repliesSuperseded

Patches in v5 posting 2/2 No applies recorded yet

None of the 20 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v5 yet.

Read the v5 thread

Cover letter [PATCH v5 00/20] Refactor the architecture parts of mt7628
Quoted 27 lines · Simon Goldschmidt
Quoted 26 lines · Weijie Gao

This patch series are divided into two parts:

The main part is to rewrite the whole architecture code of mt7628:
* Lock parts of the d-cache for initial stack so the rest of the code can be reimplemented in C.
* Memory controller & DDR initialization have been fully written to support detecting DDR size automatically.
* DDR calibration has also been reimplemented with a clear logic.
* Implemented a new sysreset driver to take advantage of the reset controller so we can drop the use of syscon-based sysreset to reduce size.

The second part is to add SPL support for mt7628:
* With SPL enabled we can build the ROM-bootable and RAM-bootable binary simultaneously, and we can drop RAM boot related configs and defconfig files.
* Generate compressed u-boot.bin image for SPL to reduce size of final combined binary.
* Enable DM support for SPL for a more flexible device probing.
* Add a demo board (mt7628_rfb) aims at router application.

Changes since v2:
* Dropped a patch which removes unused parts of mt7628a.dtsi
* Move lzma decompression support to common spl_nor.c
* Move u-boot,dm-pre-reloc to u-boot-mt7628.dtsi

Quoted 8 lines
Quoted 6 lines

Changes since v3:
* Rebased on newest master branch
* Add a test for binman etype u-boot-lzma-img to make sure binman passes 100% code coverage
* Use u-boot-with-spl.bin for SPL-enabled output file
* Remove unused code from spl_nor loader.

No changes for v5 (since v4)?

v5 is based on v3, for replacing v4. Because v4 has an obvious mistake. Modifying based on v3 is more clear than on v4.

Quoted 117 lines

Regards,
Simon

Quoted 113 lines

Weijie Gao (20):
mips: add support to restore exception vector base before booting
linux
mips: mtmips: add predefined i-cache/d-cache size and linesize
mips: add an option to support initialize SRAM for initial stack
mips: start.S: avoid overwriting outside gd when clearing global data
in stack
sysreset: add reset controller based reboot driver
mips: mtmips: make use of sysreset-resetctrl for mt7628 soc
configs: enable CONFIG_RESTORE_EXCEPTION_VECTOR_BASE for all mtmips
boards
mips: add a mtmips-specific field to architecture-specific global data
mips: add a option to support not reserving malloc space on initial
stack
mips: mtmips: rewrite lowlevel codes of mt7628
dts: mtmips: add alternative pinmux node for uart2
mips: enable support for appending dtb to spl binary
mips: add an option to enable u_boot_list section for SPL loaders in
u-boot-spl.lds
lib: enable lzma decompression support for SPL build
Makefile: add support to generate LZMA compressed u-boot image
tools: binman: add etype file for u-boot-lzma-img
spl: nor: add lzma decompression support for legacy image
mips: mtmips: add SPL support
mips: mtmips: enable SPL for all boards
mips: mtmips: add support for mt7628-rfb

 Makefile                                      |  19 +
 arch/mips/Kconfig                             |  66 ++++
 arch/mips/cpu/start.S                         |  16 +-
 arch/mips/cpu/u-boot-spl.lds                  |   4 +-
 arch/mips/dts/Makefile                        |   1 +
 arch/mips/dts/mediatek,mt7628-rfb.dts         |  67 ++++
 arch/mips/dts/mt7628-u-boot.dtsi              |  56 +++
 arch/mips/dts/mt7628a.dtsi                    |  17 +-
 arch/mips/include/asm/global_data.h           |   3 +
 arch/mips/include/asm/u-boot-mips.h           |   2 +
 arch/mips/lib/bootm.c                         |   3 +
 arch/mips/lib/traps.c                         |  19 +
 arch/mips/mach-mtmips/Kconfig                 | 135 +++----
 arch/mips/mach-mtmips/Makefile                |   8 +-
 arch/mips/mach-mtmips/cpu.c                   |  58 +---
 arch/mips/mach-mtmips/ddr_cal.c               | 211 +++++++++++
 arch/mips/mach-mtmips/ddr_calibrate.c         | 309 -----------------
 arch/mips/mach-mtmips/ddr_init.c              | 194 +++++++++++
 arch/mips/mach-mtmips/include/mach/ddr.h      |  52 +++
 arch/mips/mach-mtmips/include/mach/mc.h       | 180 ++++++++++
 arch/mips/mach-mtmips/include/mach/serial.h   |  13 +
 arch/mips/mach-mtmips/lowlevel_init.S         | 328 ------------------
 arch/mips/mach-mtmips/mt7628/Makefile         |   6 +
 arch/mips/mach-mtmips/mt7628/ddr.c            | 173 +++++++++
 arch/mips/mach-mtmips/mt7628/init.c           | 109 ++++++
 arch/mips/mach-mtmips/mt7628/lowlevel_init.S  | 161 +++++++++
 arch/mips/mach-mtmips/mt7628/mt7628.h         | 104 ++++++
 arch/mips/mach-mtmips/mt7628/serial.c         |  34 ++
 arch/mips/mach-mtmips/mt76xx.h                |  32 --
 arch/mips/mach-mtmips/spl.c                   |  44 +++
 board/gardena/smart-gateway-mt7688/board.c    |   2 +
 board/mediatek/mt7628/Kconfig                 |  12 +
 board/mediatek/mt7628/MAINTAINERS             |   7 +
 board/mediatek/mt7628/Makefile                |   3 +
 board/mediatek/mt7628/board.c                 |   8 +
 common/spl/spl_nor.c                          |  51 ++-
 ...gardena-smart-gateway-mt7688-ram_defconfig |  74 ----
 .../gardena-smart-gateway-mt7688_defconfig    |  14 +-
 configs/linkit-smart-7688-ram_defconfig       |  65 ----
 configs/linkit-smart-7688_defconfig           |  14 +-
 configs/mt7628_rfb_defconfig                  |  46 +++
 drivers/sysreset/Kconfig                      |   6 +
 drivers/sysreset/Makefile                     |   1 +
 drivers/sysreset/sysreset_resetctl.c          |  48 +++
 .../configs/gardena-smart-gateway-mt7688.h    |  21 +-
 include/configs/linkit-smart-7688.h           |  22 +-
 include/configs/mt7628.h                      |  56 +++
 lib/Kconfig                                   |   5 +
 lib/Makefile                                  |   1 +
 tools/binman/README.entries                   |  15 +
 tools/binman/etype/u_boot_lzma_img.py         |  28 ++
 tools/binman/ftest.py                         |   7 +
 tools/binman/test/156_u_boot_lzma_img.dts     |  11 +
 53 files changed, 1962 insertions(+), 979 deletions(-)
 create mode 100644 arch/mips/dts/mediatek,mt7628-rfb.dts
 create mode 100644 arch/mips/dts/mt7628-u-boot.dtsi
 create mode 100644 arch/mips/mach-mtmips/ddr_cal.c
 delete mode 100644 arch/mips/mach-mtmips/ddr_calibrate.c
 create mode 100644 arch/mips/mach-mtmips/ddr_init.c
 create mode 100644 arch/mips/mach-mtmips/include/mach/ddr.h
 create mode 100644 arch/mips/mach-mtmips/include/mach/mc.h
 create mode 100644 arch/mips/mach-mtmips/include/mach/serial.h
 delete mode 100644 arch/mips/mach-mtmips/lowlevel_init.S
 create mode 100644 arch/mips/mach-mtmips/mt7628/Makefile
 create mode 100644 arch/mips/mach-mtmips/mt7628/ddr.c
 create mode 100644 arch/mips/mach-mtmips/mt7628/init.c
 create mode 100644 arch/mips/mach-mtmips/mt7628/lowlevel_init.S
 create mode 100644 arch/mips/mach-mtmips/mt7628/mt7628.h
 create mode 100644 arch/mips/mach-mtmips/mt7628/serial.c
 delete mode 100644 arch/mips/mach-mtmips/mt76xx.h
 create mode 100644 arch/mips/mach-mtmips/spl.c
 create mode 100644 board/mediatek/mt7628/Kconfig
 create mode 100644 board/mediatek/mt7628/MAINTAINERS
 create mode 100644 board/mediatek/mt7628/Makefile
 create mode 100644 board/mediatek/mt7628/board.c
 delete mode 100644 configs/gardena-smart-gateway-mt7688-ram_defconfig
 delete mode 100644 configs/linkit-smart-7688-ram_defconfig
 create mode 100644 configs/mt7628_rfb_defconfig
 create mode 100644 drivers/sysreset/sysreset_resetctl.c
 create mode 100644 include/configs/mt7628.h
 create mode 100644 tools/binman/etype/u_boot_lzma_img.py
 create mode 100644 tools/binman/test/156_u_boot_lzma_img.dts

--
2.17.1