Skip to content

gpio-xilinx: Update on xilinx gpio driver

Srinivas Neeli linux-arm-kernel linux-gpio lkml 5 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest5 patches 5 repliesIn review
  2. v45 patches 10 repliesSuperseded
  3. v39 patches 14 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v23 patches13 repliesSuperseded
v12 patches3 repliesSuperseded

Changes in v5 from the cover letter

-Removed IRQ_DOMAIN_HIERARCHY from Kconfig and of_gpio.h
from includes.
-Added check for #gpio-cells.

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5gpio: gpio-xilinx: Simplify with dev_err_probe()drivers/gpio/gpio-xilinx.c+2 -50 replies
2/5gpio: gpio-xilinx: Reduce spinlock array to arraydrivers/gpio/gpio-xilinx.c+12 -130 replies
3/5gpio: gpio-xilinx: Add interrupt supportdrivers/gpio/Kconfig drivers/gpio/gpio-xilinx.c+244 -42 replies
4/5gpio: gpio-xilinx: Add support for suspend and resumedrivers/gpio/gpio-xilinx.c+89 -31 reply
5/5gpio: gpio-xilinx: Add check if width exceeds 32drivers/gpio/gpio-xilinx.c+5 -01 reply

Reviews trailers per patch

All 5 patches have a Reviewed-by or Acked-by.

PatchLinus WalleijWilliam Breathitt Gray
1/5R-b
2/5R-b
3/5R-b
4/5R-b
5/5R-b A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH V5 0/5] gpio-xilinx: Update on xilinx gpio driver

This patch series does the following:
-Simplify with dev_err_probe().
-Reduce spinlock array to array.
-Add interrupt support
-Add support for suspend and resume
-Add check for gpio-width
---
Changes in V5:
-Removed IRQ_DOMAIN_HIERARCHY from Kconfig and of_gpio.h
from includes.
-Added check for #gpio-cells.
Changes in V4:
-Created new patch to simplify code with dev_err_probe(). -Updated minor review comments.
-Created new patch to check gpio-width.
Changes in V3:
-Created separate patch to arrange headers in sorting order. -Updated dt-bindings.
-Created separate patch for Clock changes and runtime resume.
and suspend.
-Created separate patch for spinlock changes. -Created separate patch for remove support.
-Fixed coverity errors.
-Updated minor review comments.

Changes in V2:
-Added check for return value of platform_get_irq() API. -Updated code to support rising edge and falling edge. -Added xgpio_xlate() API to support switch. -Added MAINTAINERS fragment.

Tested Below scenarios:
-Tested Loop Back.(channel 1.0 connected to channel 2.0) -Tested External switch(Used DIP switch) -Tested Cascade scenario(Here gpio controller acting as
an interrupt controller).
---

Srinivas Neeli (5):
gpio: gpio-xilinx: Simplify with dev_err_probe()
gpio: gpio-xilinx: Reduce spinlock array to array
gpio: gpio-xilinx: Add interrupt support
gpio: gpio-xilinx: Add support for suspend and resume
gpio: gpio-xilinx: Add check if width exceeds 32

 drivers/gpio/Kconfig       |   2 +
 drivers/gpio/gpio-xilinx.c | 369 ++++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 349 insertions(+), 22 deletions(-)
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel