Use 'arm_nommu_dma_ops' to handle dma memroy if device offer consistent dma memory region
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest2 patches 13 repliesIn review
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | ARM: dts: stm32: Setup 4M bytes reserved memory for mmaparch/ | +14 | 1 reply | |
| 2/2 | arm-nommu: Add use_reserved_mem() to check if device support reserved memoryarch/ | +27 | 11 replies |
Reviews trailers per patch
1 of 2 patches has a Reviewed-by or Acked-by.
| Patch | Vladimir Murzin | dillon min |
|---|---|---|
| 1/2 | ||
| 2/2 | R-b | T-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/2] Use 'arm_nommu_dma_ops' to handle dma memroy if device offer consistent dma memory region
From: dillon min <[email protected]>
when do mmap on /dev/fb0, we will get -6 error on cortex-m3/m4 or armv7m platform without cache support, this is caused by following reason:
on armv7m platform, if no cache support, we will use dma direct mapping, but, this is not support on !MMU hardware, just return '-ENXIO' error
so, add use_reserved_mem() for these armv7m hardware but no-cache support. eg, stm32f429/stm32f469.
verified on stm32f469-disco board, mmap frambuffer to userspace.
dillon min (2):
ARM: dts: stm32: Setup 4M bytes reserved memory for mmap
arm-nommu: Add use_reserved_mem() to check if device support reserved
memory
arch/arm/boot/dts/stm32f469-disco.dts | 14 ++++++++++++++ arch/arm/mm/dma-mapping-nommu.c | 28 +++++++++++++++++++++++++++- 2 files changed, 41 insertions(+), 1 deletion(-)
Signature · 1 line
2.7.4