Skip to content

IMX274 fixes and power on and off implementation

Sowjanya Komatineni linux-devicetree linux-media lkml 6 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest3 patches 12 repliesIn review
  2. v53 patches 14 repliesSuperseded
  3. v44 patches 9 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v33 patches9 repliesSuperseded
v23 patches2 repliesSuperseded
v13 patches4 repliesSuperseded

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3media: i2c: imx274: Fix Y_OUT_SIZE register settingdrivers/media/i2c/imx274.c+1 -11 reply
2/3media: i2c: imx274: Remove stop stream i2c writes during removedrivers/media/i2c/imx274.c+0 -35 replies
3/3media: i2c: imx274: Add IMX274 power on and off sequencedrivers/media/i2c/imx274.c+134 -506 replies

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchLuca CeresoliThierry Reding
1/3R-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v6 thread

Cover letter [PATCH v6 0/3] IMX274 fixes and power on and off implementation

This patch series includes
- Fix for proper Y_OUT_SIZE register configuration.
- Remove sensor i2c register writes to stop stream during remove.
- Power on/off sequence implementation through runtime PM.

Delta between patch versions:
[v6]: Includes below v5 feedback
- Added separate small patch to remove i2c writes to stop sensor during remove.
- Removed dt-binding patch from this series as they are posted by Jacob.
https://www.spinics.net/lists/linux-renesas-soc/msg52831.html
- Uses udelay for 2uS delay after regulators are on before releasing reset.
- Moved v4l2_ctrl_handler setup to do during start streaming to configure user controls when sensor power is on during streaming.
- Other minor changes based on v5 feedback.

[v5]: Includes below v4 feedback
- dt-bindings patch to add optional clock and supplies and rebased on below json-schema patch.
https://patchwork.kernel.org/patch/11732875/
- Other minor v4 feedbacks.

[v4]: Includes below v3 feedback
- Implemented power on/off through Runtime PM.
- Use regulator bulk APIs.
- Use lower case for supply names.

[v3]: Includes below v2 feedback
- Removed explicit clk_set_rate from driver as default external input clock rate can be configured through DT.

[v2]: Includes below changes based on v1 feedback
- External input clock name changed from xclk to inck.
- implementation change for get regulators to store all in array.
- To keep in reset low prior to regulators power on.

Sowjanya Komatineni (3):
media: i2c: imx274: Fix Y_OUT_SIZE register setting
media: i2c: imx274: Remove stop stream i2c writes during remove
media: i2c: imx274: Add IMX274 power on and off sequence

 drivers/media/i2c/imx274.c | 187 ++++++++++++++++++++++++++++++++-------------
 1 file changed, 134 insertions(+), 53 deletions(-)
Signature · 1 line
2.7.4